RULAND MANUFACTURING Shaft Collar: 2-Piece, Metric, Round, Clamp-On, 10 mm Bore Dia
The RULAND MANUFACTURING Shaft Collar is a 2-piece, stainless steel shaft collar with a metric, round, clamp-on design. It features a 10 mm bore diameter and a 9 mm collar width (MPN MSP-10-SS).
SKU 3G-OTH-132556
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The RULAND MANUFACTURING Shaft Collar is a 2-piece, stainless steel shaft collar with a metric, round, clamp-on design. It features a 10 mm bore diameter and a 9 mm collar width (MPN MSP-10-SS).
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is a RULAND MANUFACTURING 2-piece shaft collar used for?
A RULAND MANUFACTURING 2-piece shaft collar is used to secure components on a shaft, prevent axial movement, or serve as a mechanical stop in industrial machinery. It is commonly applied in conveyors, packaging equipment, and automation systems where precise positioning and reliable clamping are required.
What are the specifications of the RULAND MANUFACTURING MSP-10-SS shaft collar?
The RULAND MANUFACTURING MSP-10-SS is a 2-piece, round, clamp-on shaft collar with a 10 mm bore diameter and 9 mm collar width. It is made of stainless steel and is metric. The manufacturer part number is MSP-10-SS, and it is designed for secure clamping without marring the shaft.
Where to buy RULAND MANUFACTURING shaft collars worldwide?
You can source RULAND MANUFACTURING shaft collars worldwide through 3G Electric, a global industrial equipment distributor. 3G Electric handles full logistics, customs clearance, and delivery to your location. Contact them for availability and lead time on the MSP-10-SS or other RULAND MANUFACTURING components.
How to install a 2-piece clamp-on shaft collar?
To install a 2-piece clamp-on shaft collar, first clean the shaft surface. Place the collar halves around the shaft at the desired position, align the screws, and tighten them evenly with a hex key to the manufacturer's recommended torque. Avoid over-tightening to prevent shaft damage. Always verify alignment after installation.
Digunakan dalam
Aplikasi umum untuk RULAND MANUFACTURINGRULAND MANUFACTURING Produk
3G Electric memasok RULAND MANUFACTURING stainless steel shaft collars. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
