RULAND MANUFACTURING Motion Control Coupling Hub: 0.5° Angular Misalignment
The RULAND MANUFACTURING Motion Control Coupling Hub (MPN MOCT41-10-A) is a clamp-on Oldham coupling hub for round shafts, designed for 0.5° angular misalignment and 0.15 mm axial motion. This hub is part of the…
SKU 3G-OTH-135231
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The RULAND MANUFACTURING Motion Control Coupling Hub (MPN MOCT41-10-A) is a clamp-on Oldham coupling hub for round shafts, designed for 0.5° angular misalignment and 0.15 mm axial motion. This hub is part of the MOCT41 series from RULAND MANUFACTURING.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is the RULAND MANUFACTURING MOCT41-10-A coupling hub used for?
The RULAND MANUFACTURING MOCT41-10-A is a clamp-on Oldham coupling hub for round shafts. It is used in motion control applications to transmit torque while accommodating 0.5° angular misalignment and 0.15 mm axial motion, protecting connected equipment from misalignment-induced wear.
What are the specifications of the RULAND MANUFACTURING MOCT41-10-A?
The RULAND MANUFACTURING MOCT41-10-A is a clamp-on Oldham coupling hub from the MOCT41 series. It allows 0.5° angular misalignment and 0.15 mm axial motion. The manufacturer part number is MOCT41-10-A, and it is designed for round shafts in motion control systems.
Where to buy the RULAND MANUFACTURING MOCT41-10-A worldwide?
3G Electric supplies the RULAND MANUFACTURING MOCT41-10-A coupling hub worldwide. As a global industrial equipment distributor, we handle full logistics, customs clearance, and delivery to your location. Contact 3G Electric for availability and lead time on this motion control component.
How to install a RULAND MANUFACTURING clamp-on Oldham coupling hub?
To install the RULAND MANUFACTURING MOCT41-10-A, clean the shaft and hub bore, then slide the hub onto the round shaft. Tighten the clamp screws evenly to the manufacturer's recommended torque. Ensure the mating Oldham disc and second hub align within the 0.5° angular and 0.15 mm axial limits.
Digunakan dalam
Aplikasi umum untuk RULAND MANUFACTURINGRULAND MANUFACTURING Produk
3G Electric memasok RULAND MANUFACTURING clamp-on oldham coupling hubs for round shafts. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
