RULAND MANUFACTURING Shaft Collar: 2-Piece, Inch, Round, Clamp-On, 1 1/8 in Bore Dia
The RULAND MANUFACTURING Shaft Collar is a 2-piece, inch, round, clamp-on stainless steel shaft collar with a 1 1/8 in bore diameter, made from 303 stainless steel (MPN SP-18-SS). 3G Electric interprets your demand…
SKU 3G-OTH-132764
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The RULAND MANUFACTURING Shaft Collar is a 2-piece, inch, round, clamp-on stainless steel shaft collar with a 1 1/8 in bore diameter, made from 303 stainless steel (MPN SP-18-SS). 3G Electric interprets your demand for genuine industrial components and delivers this collar as part of our broad supply across 14 departments, with specialist depth in combustion, pumps, and controls to ensure you get the right part.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is a RULAND MANUFACTURING SP-18-SS shaft collar used for?
The RULAND MANUFACTURING SP-18-SS is a 2-piece, clamp-on shaft collar used to position, secure, or limit components on a shaft in industrial machinery. Its 303 stainless steel construction resists corrosion, making it suitable for food processing, packaging, and marine equipment where hygiene or moisture resistance is required.
What are the specifications of the RULAND MANUFACTURING SP-18-SS shaft collar?
The SP-18-SS is a 2-piece, round, clamp-on shaft collar with a 1 1/8 in bore diameter. It is made from 303 stainless steel and manufactured by RULAND MANUFACTURING. The inch-series design fits standard imperial shafts and provides secure positioning without marring the shaft surface.
Where to buy RULAND MANUFACTURING SP-18-SS shaft collars worldwide?
3G Electric supplies RULAND MANUFACTURING SP-18-SS shaft collars worldwide. As a global industrial equipment distributor since 1990, we handle full logistics, customs clearance, and delivery to your location. Contact us for availability and lead time on this part number.
How to install a RULAND MANUFACTURING 2-piece clamp-on shaft collar?
To install the SP-18-SS, place the two halves around the shaft at the desired position, then tighten the clamp screws evenly using a hex key. Avoid over-tightening to prevent distortion. For best results, clean the shaft surface before installation and check alignment with a feeler gauge if required.
Digunakan dalam
Aplikasi umum untuk RULAND MANUFACTURINGRULAND MANUFACTURING Produk
3G Electric memasok RULAND MANUFACTURING stainless steel shaft collars. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
