RULAND MANUFACTURING Shaft Collar: 2-Piece, Inch, Round, Clamp-On, 1 3/8 in Bore Dia
The RULAND MANUFACTURING Shaft Collar is a 2-piece, inch, round, clamp-on carbon steel shaft collar with a 1 3/8 in bore diameter (MPN SP-22-F). 3G Electric interprets your demand for this genuine industrial…
SKU 3G-OTH-160252
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The RULAND MANUFACTURING Shaft Collar is a 2-piece, inch, round, clamp-on carbon steel shaft collar with a 1 3/8 in bore diameter (MPN SP-22-F). 3G Electric interprets your demand for this genuine industrial component, sourcing it across 14 departments — and we supply far more than is listed — with specialist depth in combustion, pumps and controls as a trust anchor.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is a RULAND MANUFACTURING SP-22-F shaft collar used for?
The RULAND MANUFACTURING SP-22-F is a 2-piece, clamp-on shaft collar used to position, secure, or limit components on a shaft. It is commonly applied in industrial machinery, conveyors, and automation systems where precise axial location is required.
What are the specifications of the RULAND MANUFACTURING SP-22-F shaft collar?
The SP-22-F is a 2-piece, round, clamp-on shaft collar with a 1 3/8 in bore diameter. It is made of carbon steel and uses an inch measurement system. The manufacturer part number is SP-22-F, and it is produced by RULAND MANUFACTURING.
Where to buy a RULAND MANUFACTURING SP-22-F shaft collar worldwide?
You can source the RULAND MANUFACTURING SP-22-F shaft collar through 3G Electric, a global industrial equipment distributor. We handle full logistics, customs clearance, and delivery to worldwide destinations, ensuring a smooth procurement process for your facility.
How to install a RULAND MANUFACTURING 2-piece clamp-on shaft collar?
To install the SP-22-F, place the two halves around the shaft at the desired position, then tighten the clamping screws evenly using a hex key. Ensure the bore is clean and the shaft is free of debris. Avoid over-tightening to prevent shaft damage.
Digunakan dalam
Aplikasi umum untuk RULAND MANUFACTURINGRULAND MANUFACTURING Produk
3G Electric memasok RULAND MANUFACTURING steel shaft collars. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
