RULAND MANUFACTURING Shaft Collar: 2-Piece, Metric with Inch Bore, Round, Clamp-On
The RULAND MANUFACTURING Shaft Collar is a 2-piece steel shaft collar, type Metric with Inch Bore, Round, Clamp-On, with a 19 mm Collar Wd (MPN MSP-35E-F). This component is designed for clamping onto shafts…
SKU 3G-OTH-160344
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The RULAND MANUFACTURING Shaft Collar is a 2-piece steel shaft collar, type Metric with Inch Bore, Round, Clamp-On, with a 19 mm Collar Wd (MPN MSP-35E-F). This component is designed for clamping onto shafts, providing a secure and adjustable positioning solution.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is the RULAND MANUFACTURING MSP-35E-F shaft collar used for?
The RULAND MANUFACTURING MSP-35E-F is a 2-piece, clamp-on steel shaft collar used to position and secure components on shafts in industrial machinery, conveyors, and automation systems. It prevents axial movement and provides a positive stop for bearings, sprockets, and pulleys.
What are the specifications of the RULAND MANUFACTURING MSP-35E-F shaft collar?
The MSP-35E-F is a metric with inch bore, round, clamp-on steel shaft collar from RULAND MANUFACTURING. It has a 19 mm collar width and is designed for secure clamping without marring the shaft. The 2-piece design allows for easy installation and adjustment.
Where to buy the RULAND MANUFACTURING MSP-35E-F shaft collar worldwide?
You can source the RULAND MANUFACTURING MSP-35E-F shaft collar through 3G Electric, a global industrial equipment distributor. We handle full logistics, customs clearance, and delivery to worldwide destinations, ensuring the part reaches your facility reliably.
How to install a RULAND MANUFACTURING 2-piece clamp-on shaft collar?
To install the RULAND MANUFACTURING MSP-35E-F, place the two halves around the shaft at the desired position, align the clamping screws, and tighten them evenly with a hex key. Avoid over-tightening to prevent shaft damage. Always verify the collar is secure before operation.
Digunakan dalam
Aplikasi umum untuk RULAND MANUFACTURINGRULAND MANUFACTURING Produk
3G Electric memasok RULAND MANUFACTURING steel shaft collars. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
