RULAND MANUFACTURING Shaft Collar: 2-Piece, Metric with Inch Bore, Round, Clamp-On
The RULAND MANUFACTURING Shaft Collar is a 2-piece steel shaft collar, type Metric with Inch Bore, Round, Clamp-On, with a 19 mm Collar Wd (MPN MSP-40E-F). This product is a genuine RULAND MANUFACTURING component…
SKU 3G-OTH-160405
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The RULAND MANUFACTURING Shaft Collar is a 2-piece steel shaft collar, type Metric with Inch Bore, Round, Clamp-On, with a 19 mm Collar Wd (MPN MSP-40E-F). This product is a genuine RULAND MANUFACTURING component, designed for clamping onto shafts.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is the RULAND MANUFACTURING MSP-40E-F shaft collar used for?
The RULAND MANUFACTURING MSP-40E-F is a 2-piece, clamp-on steel shaft collar used to position, secure, or limit components on shafts in industrial machinery, conveyors, and automation systems. Its round, metric design with an inch bore provides precise axial retention without marring the shaft.
What are the specifications of the RULAND MANUFACTURING MSP-40E-F shaft collar?
The MSP-40E-F is a 2-piece, round, clamp-on steel shaft collar with a 19 mm collar width. It features a metric design with an inch bore, manufactured by RULAND MANUFACTURING under part number MSP-40E-F. The clamp-on style allows easy repositioning without shaft damage.
Where to buy the RULAND MANUFACTURING MSP-40E-F shaft collar worldwide?
3G Electric supplies the RULAND MANUFACTURING MSP-40E-F shaft collar worldwide. As a global industrial equipment distributor since 1990, we handle full logistics, customs clearance, and delivery to your location. Contact us to source this part for your application.
How to install a RULAND MANUFACTURING 2-piece clamp-on shaft collar?
To install the MSP-40E-F, place the two halves around the shaft, align the clamping screws, and tighten evenly with a hex key to the manufacturer's recommended torque. Ensure the bore is clean and the collar is positioned correctly before final tightening. Periodic re-torquing is recommended.
Digunakan dalam
Aplikasi umum untuk RULAND MANUFACTURINGRULAND MANUFACTURING Produk
3G Electric memasok RULAND MANUFACTURING steel shaft collars. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
