RULAND MANUFACTURING Shaft Collar: 2-Piece, Inch, Round, Clamp-On, 1/2 in Bore Dia
The RULAND MANUFACTURING Shaft Collar is a 2-piece, inch, round, clamp-on stainless steel shaft collar with a 1/2 in bore diameter (MPN SP-8-ST). This component is designed for secure positioning on shafts in…
SKU 3G-OTH-132505
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The RULAND MANUFACTURING Shaft Collar is a 2-piece, inch, round, clamp-on stainless steel shaft collar with a 1/2 in bore diameter (MPN SP-8-ST). This component is designed for secure positioning on shafts in industrial applications.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is a RULAND MANUFACTURING SP-8-ST shaft collar used for?
The RULAND MANUFACTURING SP-8-ST is a 2-piece, clamp-on shaft collar used to position, secure, or limit components on a shaft in industrial machinery, conveyors, and automation systems. Its stainless steel construction resists corrosion in washdown or outdoor environments.
What are the specifications of the RULAND MANUFACTURING SP-8-ST shaft collar?
The SP-8-ST is a 2-piece, round, clamp-on shaft collar with a 1/2 in bore diameter. It is made of stainless steel and manufactured by RULAND MANUFACTURING. The inch-series design suits fractional-inch shafting common in North American equipment.
Where to buy the RULAND MANUFACTURING SP-8-ST shaft collar worldwide?
3G Electric supplies the RULAND MANUFACTURING SP-8-ST shaft collar worldwide. As a global industrial distributor, we handle full logistics, customs clearance, and delivery to your site. Contact us for availability and lead time on this stainless steel clamp-on collar.
How to install a RULAND MANUFACTURING 2-piece clamp-on shaft collar?
To install the SP-8-ST, loosen the clamping screws, place the two halves around the shaft at the desired position, then tighten the screws evenly to the manufacturer's recommended torque. Ensure the bore is clean and the shaft is free of burrs for secure clamping without shaft damage.
Digunakan dalam
Aplikasi umum untuk RULAND MANUFACTURINGRULAND MANUFACTURING Produk
3G Electric memasok RULAND MANUFACTURING stainless steel shaft collars. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
