RULAND MANUFACTURING Jaw Coupling Hub: JC36 Coupling Size, 2 1/4 in Outside Dia, Inch
The RULAND MANUFACTURING JC36-10-A is a zero-backlash curved jaw coupling hub in the JC36 coupling size, constructed from inch-dimensioned aluminum. It has an outside diameter of 2 1/4 inches and is manufactured by…
SKU 3G-OTH-134127
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The RULAND MANUFACTURING JC36-10-A is a zero-backlash curved jaw coupling hub in the JC36 coupling size, constructed from inch-dimensioned aluminum. It has an outside diameter of 2 1/4 inches and is manufactured by RULAND MANUFACTURING.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is a RULAND MANUFACTURING JC36-10-A jaw coupling hub used for?
The RULAND MANUFACTURING JC36-10-A is a zero-backlash curved jaw coupling hub used to connect two rotating shafts in motion-control systems. It is commonly applied in servo motors, encoders, and precision positioning equipment where accurate torque transmission and misalignment compensation are required.
What are the specifications of the RULAND MANUFACTURING JC36-10-A?
The RULAND MANUFACTURING JC36-10-A is a jaw coupling hub with a JC36 coupling size, 2 1/4 in outside diameter, and inch bore dimensions. It is made of aluminum and is part of the zero-backlash curved jaw coupling hub series. The manufacturer part number is JC36-10-A.
Where to buy RULAND MANUFACTURING JC36-10-A worldwide?
You can source the RULAND MANUFACTURING JC36-10-A through 3G Electric, a global industrial equipment distributor. We handle full logistics, customs clearance, and delivery to worldwide destinations. Contact us for availability and lead time on this zero-backlash curved jaw coupling hub.
How to select the correct RULAND MANUFACTURING jaw coupling hub?
To select the correct RULAND MANUFACTURING jaw coupling hub, match the coupling size (e.g., JC36) to your shaft diameters and torque requirements. Ensure the hub bore fits your shaft, and consider the material—aluminum for low inertia or steel for higher torque. Always verify misalignment tolerances per the manufacturer's guidelines.
Digunakan dalam
Aplikasi umum untuk RULAND MANUFACTURINGRULAND MANUFACTURING Produk
3G Electric memasok RULAND MANUFACTURING zero-backlash curved jaw coupling hubs. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
