RULAND MANUFACTURING Shaft Collar: 2-Piece, Metric with Inch Bore, Round, Clamp-On
The RULAND MANUFACTURING Shaft Collar is a 2-piece stainless steel shaft collar, type Metric with Inch Bore, Round, Clamp-On, with a 15 mm collar width (MPN MSP-13E-ST). This clamp-on design provides secure shaft…
SKU 3G-OTH-132816
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The RULAND MANUFACTURING Shaft Collar is a 2-piece stainless steel shaft collar, type Metric with Inch Bore, Round, Clamp-On, with a 15 mm collar width (MPN MSP-13E-ST). This clamp-on design provides secure shaft positioning without marring the shaft.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is the RULAND MANUFACTURING MSP-13E-ST shaft collar used for?
The RULAND MANUFACTURING MSP-13E-ST is a 2-piece, clamp-on shaft collar used to position, secure, or limit axial movement on a shaft. It is commonly applied in industrial machinery, conveyors, and automation systems where precise component location and reliable clamping are required.
What are the specifications of the RULAND MANUFACTURING MSP-13E-ST shaft collar?
The MSP-13E-ST is a stainless steel, 2-piece, round clamp-on shaft collar with a metric design and an inch bore. It has a 15 mm collar width. The manufacturer part number is MSP-13E-ST, and it is made by RULAND MANUFACTURING.
Where to buy the RULAND MANUFACTURING MSP-13E-ST shaft collar worldwide?
You can source the RULAND MANUFACTURING MSP-13E-ST shaft collar through 3G Electric, a global industrial equipment distributor. We handle full logistics, customs clearance, and delivery to worldwide destinations, ensuring the part reaches your facility reliably.
How to install a 2-piece clamp-on shaft collar like the RULAND MSP-13E-ST?
To install a 2-piece clamp-on shaft collar, separate the two halves, place them around the shaft at the desired position, then tighten the screws evenly to the manufacturer's recommended torque. Ensure the shaft is clean and free of debris to achieve secure clamping without damaging the shaft surface.
Digunakan dalam
Aplikasi umum untuk RULAND MANUFACTURINGRULAND MANUFACTURING Produk
3G Electric memasok RULAND MANUFACTURING stainless steel shaft collars. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
