RULAND MANUFACTURING Shaft Collar: 2-Piece, Metric with Inch Bore, Round, Clamp-On
The RULAND MANUFACTURING Shaft Collar is a 2-piece stainless steel shaft collar, model MSP-30E-ST, with a metric design featuring an inch bore and round, clamp-on configuration. It has a 19 mm collar width, supplied…
SKU 3G-OTH-132558
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The RULAND MANUFACTURING Shaft Collar is a 2-piece stainless steel shaft collar, model MSP-30E-ST, with a metric design featuring an inch bore and round, clamp-on configuration. It has a 19 mm collar width, supplied by 3G Electric as part of our industrial solutions across 14 departments, with specialist depth in controls and power transmission.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is a Ruland Manufacturing 2-piece shaft collar used for?
A Ruland Manufacturing 2-piece shaft collar is used to locate, space, or limit components on a shaft without marring the shaft surface. It is commonly applied in industrial machinery, conveyors, and automation systems where precise axial positioning and easy installation or removal are required.
What are the specifications of the Ruland MSP-30E-ST shaft collar?
The Ruland MSP-30E-ST is a stainless steel, 2-piece, round, clamp-on shaft collar with a metric design and inch bore. It has a collar width of 19 mm. The manufacturer part number is MSP-30E-ST, and it is made by Ruland Manufacturing.
Where to buy Ruland Manufacturing shaft collars worldwide?
You can source Ruland Manufacturing shaft collars, including the MSP-30E-ST, through 3G Electric. We handle full logistics, customs clearance, and delivery to worldwide destinations. Contact us for availability and lead time on your order.
How to install a Ruland 2-piece clamp-on shaft collar?
To install a Ruland 2-piece clamp-on shaft collar, separate the two halves, place them around the shaft at the desired position, then tighten the screws evenly to the manufacturer's recommended torque. Ensure the shaft is clean and free of debris before installation for secure clamping.
Digunakan dalam
Aplikasi umum untuk RULAND MANUFACTURINGRULAND MANUFACTURING Produk
3G Electric memasok RULAND MANUFACTURING stainless steel shaft collars. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
