RULAND MANUFACTURING Shaft Collar: 2-Piece, Metric, Round, Clamp-On, 5 mm Bore Dia
The RULAND MANUFACTURING Shaft Collar is a 2-piece, metric, round, clamp-on steel shaft collar with a 5 mm bore diameter and 9 mm collar width (MPN MSP-5-FZ). It is designed for secure shaft positioning in industrial…
SKU 3G-OTH-160179
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The RULAND MANUFACTURING Shaft Collar is a 2-piece, metric, round, clamp-on steel shaft collar with a 5 mm bore diameter and 9 mm collar width (MPN MSP-5-FZ). It is designed for secure shaft positioning in industrial applications.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is the RULAND MANUFACTURING MSP-5-FZ shaft collar used for?
The RULAND MANUFACTURING MSP-5-FZ is a 2-piece, clamp-on shaft collar used to position, secure, or limit axial movement on a 5 mm shaft. It is commonly applied in industrial machinery, conveyors, and automation systems where precise component alignment and retention are required.
What are the specifications of the RULAND MANUFACTURING MSP-5-FZ shaft collar?
The MSP-5-FZ is a metric, round, 2-piece clamp-on shaft collar with a 5 mm bore diameter and 9 mm collar width. It is made of steel by RULAND MANUFACTURING. The manufacturer part number is MSP-5-FZ. It provides secure, backlash-free clamping on shafts without marring the surface.
Where to buy the RULAND MANUFACTURING MSP-5-FZ shaft collar worldwide?
You can source the RULAND MANUFACTURING MSP-5-FZ shaft collar worldwide through 3G Electric. As a global industrial equipment distributor, 3G Electric handles full logistics, customs clearance, and delivery to your location. Contact us for availability and lead time.
How to install a 2-piece clamp-on shaft collar like the RULAND MSP-5-FZ?
To install a 2-piece clamp-on shaft collar, place the two halves around the shaft at the desired position, then tighten the screws evenly to the manufacturer's recommended torque. Ensure the bore is clean and the shaft is free of debris. Avoid over-tightening to prevent shaft damage.
Digunakan dalam
Aplikasi umum untuk RULAND MANUFACTURINGRULAND MANUFACTURING Produk
3G Electric memasok RULAND MANUFACTURING steel shaft collars. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
