RULAND MANUFACTURING Shaft Collar: 2-Piece, Inch, Round, Clamp-On, 1 11/16 in Bore Dia
The RULAND MANUFACTURING Shaft Collar is a 2-piece, inch, round, clamp-on type in 316 stainless steel with a 1 11/16 in bore diameter (MPN SP-27-ST). 3G Electric sources this genuine industrial component across 14…
SKU 3G-OTH-126780
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The RULAND MANUFACTURING Shaft Collar is a 2-piece, inch, round, clamp-on type in 316 stainless steel with a 1 11/16 in bore diameter (MPN SP-27-ST). 3G Electric sources this genuine industrial component across 14 departments, with specialist expertise in combustion, pumps, and controls as an authorised distributor.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is a RULAND MANUFACTURING SP-27-ST shaft collar used for?
The RULAND MANUFACTURING SP-27-ST is a 2-piece, clamp-on shaft collar used to position, secure, or limit components on a shaft. It is commonly applied in industrial machinery, conveyor systems, and automation equipment where precise axial location and corrosion resistance are required.
What are the specifications of the RULAND MANUFACTURING SP-27-ST shaft collar?
The SP-27-ST is a 2-piece, round, clamp-on shaft collar with a 1 11/16 in bore diameter. It is made from 316 stainless steel for corrosion resistance. The manufacturer part number is SP-27-ST, and it is produced by RULAND MANUFACTURING.
Where to buy RULAND MANUFACTURING shaft collars in worldwide?
3G Electric supplies RULAND MANUFACTURING shaft collars worldwide. As a global industrial distributor, we handle full logistics, customs clearance, and delivery to your location. Contact us to source the SP-27-ST or other RULAND components for your application.
How to install a 2-piece clamp-on shaft collar?
To install a 2-piece clamp-on shaft collar, loosen the screws, place both halves around the shaft at the desired position, then tighten the screws evenly to the manufacturer's recommended torque. Ensure the bore is clean and the shaft is free of debris for a secure grip without marring.
Digunakan dalam
Aplikasi umum untuk RULAND MANUFACTURINGRULAND MANUFACTURING Produk
3G Electric memasok RULAND MANUFACTURING stainless steel shaft collars. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
