RULAND MANUFACTURING Slit Coupling: 5 mm Bore Dia 1, 4 mm Bore Dia 2
The RULAND MANUFACTURING MRLC16-5-4-A is a long clamp-on slit coupling with a 5 mm bore diameter 1 and a 4 mm bore diameter 2, featuring a 16 mm coupling outside diameter. This component is designed for motion…
SKU 3G-OTH-151385
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The RULAND MANUFACTURING MRLC16-5-4-A is a long clamp-on slit coupling with a 5 mm bore diameter 1 and a 4 mm bore diameter 2, featuring a 16 mm coupling outside diameter. This component is designed for motion control applications requiring precise shaft alignment and torque transmission.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is a Ruland Manufacturing slit coupling used for?
A Ruland Manufacturing slit coupling connects two shafts in motion-control applications, compensating for minor misalignment while transmitting torque. It is commonly used in encoders, stepper motors, and precision positioning systems where zero backlash and high torsional stiffness are required.
What are the specifications of the Ruland MRLC16-5-4-A slit coupling?
The Ruland MRLC16-5-4-A is a long clamp-on slit coupling with a 5 mm bore diameter 1, a 4 mm bore diameter 2, and a 16 mm coupling outside diameter. It is designed for applications needing high torque capacity and low wind-up.
Where to buy a Ruland MRLC16-5-4-A slit coupling worldwide?
3G Electric supplies the Ruland MRLC16-5-4-A slit coupling worldwide. As a global industrial solutions provider, we handle full logistics, customs clearance, and delivery to your location. Contact us for pricing and lead time on this precision coupling.
How to install a Ruland clamp-on slit coupling?
To install a Ruland clamp-on slit coupling, ensure both shaft ends are clean and free of burrs. Slide the coupling onto the shafts, align the bores, and tighten the clamp screws evenly to the manufacturer’s recommended torque. Avoid over-tightening to prevent shaft damage.
Digunakan dalam
Aplikasi umum untuk RULAND MANUFACTURINGRULAND MANUFACTURING Produk
3G Electric memasok RULAND MANUFACTURING long clamp-on slit couplings. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
