RULAND MANUFACTURING Slit Coupling: 8 mm Bore Dia 1, 8 mm Bore Dia 2
The RULAND MANUFACTURING MRSC16-8-8-A is a short clamp-on slit coupling with 8 mm bore diameters for both ends and a 16 mm coupling outside diameter. This product is a short clamp-on slit coupling from RULAND…
SKU 3G-OTH-142003
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The RULAND MANUFACTURING MRSC16-8-8-A is a short clamp-on slit coupling with 8 mm bore diameters for both ends and a 16 mm coupling outside diameter. This product is a short clamp-on slit coupling from RULAND MANUFACTURING.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is a RULAND MANUFACTURING Slit Coupling used for?
A RULAND MANUFACTURING Slit Coupling, such as the MRSC16-8-8-A, is used to connect two shafts in motion-control systems, compensating for minor misalignment while transmitting torque. It is commonly applied in robotics, packaging machinery, and precision automation where zero backlash and high torsional stiffness are required.
What are the specifications of the RULAND MANUFACTURING MRSC16-8-8-A?
The RULAND MANUFACTURING MRSC16-8-8-A is a short clamp-on slit coupling with 8 mm bore diameter on both ends and a 16 mm coupling outside diameter. It is designed for zero-backlash torque transmission and accommodates parallel, angular, and axial misalignment in servo and stepper motor applications.
Where to buy RULAND MANUFACTURING couplings in worldwide?
You can source RULAND MANUFACTURING couplings, including the MRSC16-8-8-A, through 3G Electric. As a global industrial equipment distributor, 3G Electric handles full logistics, customs clearance, and delivery to worldwide destinations, ensuring reliable procurement for your motion-control needs.
How to install a RULAND MANUFACTURING slit coupling?
To install a RULAND MANUFACTURING slit coupling, first ensure shaft ends are clean and free of burrs. Slide the coupling onto both shafts, align the clamp screws over the shaft flats, then tighten the screws evenly to the manufacturer's recommended torque. Avoid over-tightening to prevent damage to the coupling or shafts.
Digunakan dalam
Aplikasi umum untuk RULAND MANUFACTURINGRULAND MANUFACTURING Produk
3G Electric memasok RULAND MANUFACTURING short clamp-on slit couplings. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
