RULAND MANUFACTURING Slit Coupling: 5 mm Bore Dia 1, 5 mm Bore Dia 2
The RULAND MANUFACTURING MRSC20-5-5-A is a short clamp-on slit coupling with a 5 mm bore diameter for both bore 1 and bore 2, and a 20 mm coupling outside diameter. This product is a Short Clamp-On Slit Coupling from…
SKU 3G-OTH-141973
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The RULAND MANUFACTURING MRSC20-5-5-A is a short clamp-on slit coupling with a 5 mm bore diameter for both bore 1 and bore 2, and a 20 mm coupling outside diameter. This product is a Short Clamp-On Slit Coupling from RULAND MANUFACTURING.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is a RULAND MANUFACTURING Slit Coupling used for?
A RULAND MANUFACTURING Slit Coupling, such as the MRSC20-5-5-A, is used to connect two shafts in motion-control systems while compensating for minor misalignment. It is commonly applied in robotics, encoders, and precision positioning equipment where zero backlash and torsional rigidity are required.
What are the specifications of the RULAND MANUFACTURING MRSC20-5-5-A Slit Coupling?
The RULAND MANUFACTURING MRSC20-5-5-A is a short clamp-on slit coupling with 5 mm bore diameters on both ends and a 20 mm coupling outside diameter. It is designed for zero-backlash torque transmission and accommodates parallel, angular, and axial misalignment in light-duty applications.
Where to buy RULAND MANUFACTURING Slit Couplings worldwide?
You can source RULAND MANUFACTURING Slit Couplings worldwide through 3G Electric, a global industrial equipment distributor. We handle full logistics, customs clearance, and delivery to your location. Contact us for availability and lead time on the MRSC20-5-5-A or other RULAND MANUFACTURING motion-control components.
How to install a RULAND MANUFACTURING clamp-on slit coupling?
To install a RULAND MANUFACTURING clamp-on slit coupling, first ensure both shaft ends are clean and free of burrs. Slide the coupling onto the shafts, align the bores, then tighten the clamp screws evenly to the manufacturer’s recommended torque using a hex key. Avoid over-tightening to prevent distortion.
Digunakan dalam
Aplikasi umum untuk RULAND MANUFACTURINGRULAND MANUFACTURING Produk
3G Electric memasok RULAND MANUFACTURING short clamp-on slit couplings. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
