RULAND MANUFACTURING Slit Coupling: 12 mm Bore Dia 1, 10 mm Bore Dia 2
The RULAND MANUFACTURING MRSC25-12-10-A is a short clamp-on slit coupling with a 12 mm bore diameter 1 and a 10 mm bore diameter 2, featuring a 25 mm coupling outside diameter. This product is a short clamp-on slit…
SKU 3G-OTH-142066
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The RULAND MANUFACTURING MRSC25-12-10-A is a short clamp-on slit coupling with a 12 mm bore diameter 1 and a 10 mm bore diameter 2, featuring a 25 mm coupling outside diameter. This product is a short clamp-on slit coupling from RULAND MANUFACTURING.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is a RULAND MANUFACTURING Slit Coupling used for?
A RULAND MANUFACTURING Slit Coupling, such as the MRSC25-12-10-A, is used to connect two shafts in motion-control systems while compensating for minor misalignment. It is ideal for precision applications like encoders, stepper motors, and linear actuators where zero backlash and high torsional stiffness are required.
What are the specifications of the RULAND MANUFACTURING MRSC25-12-10-A?
The RULAND MANUFACTURING MRSC25-12-10-A is a short clamp-on slit coupling with a 12 mm bore diameter 1, a 10 mm bore diameter 2, and a 25 mm coupling outside diameter. It is designed for zero-backlash torque transmission and accommodates parallel, angular, and axial misalignment in industrial automation systems.
Where to buy RULAND MANUFACTURING couplings in worldwide?
You can source RULAND MANUFACTURING couplings, including the MRSC25-12-10-A, through 3G Electric. As a global industrial equipment distributor, 3G Electric handles full logistics, customs clearance, and delivery to worldwide destinations, ensuring you receive genuine components for your motion-control applications.
How to install a RULAND MANUFACTURING slit coupling?
To install a RULAND MANUFACTURING slit coupling, first ensure both shaft ends are clean and free of debris. Slide the coupling onto the shafts, align the bores, and tighten the clamp screws evenly using a torque wrench to the manufacturer's recommended value. Avoid over-tightening to prevent damage to the coupling or shafts.
Digunakan dalam
Aplikasi umum untuk RULAND MANUFACTURINGRULAND MANUFACTURING Produk
3G Electric memasok RULAND MANUFACTURING short clamp-on slit couplings. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
