RULAND MANUFACTURING Slit Coupling: 1/4 in Bore Dia 1, 1/4 in Bore Dia 2, 27/32 in Overall Lg
The RULAND MANUFACTURING Slit Coupling is a short clamp-on slit coupling with 1/4 in bore diameters and a 27/32 in overall length, part number RSC13-4-4-A. This inch-sized coupling is designed for motion control…
SKU 3G-OTH-141981
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The RULAND MANUFACTURING Slit Coupling is a short clamp-on slit coupling with 1/4 in bore diameters and a 27/32 in overall length, part number RSC13-4-4-A. This inch-sized coupling is designed for motion control applications requiring a zero-backlash, single-piece design.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is a Ruland Manufacturing slit coupling used for?
A Ruland Manufacturing slit coupling connects two shafts in motion-control systems, compensating for minor misalignment while transmitting torque. It is commonly used in encoders, stepper motors, and precision positioning equipment where zero backlash and low bearing loads are required.
What are the specifications of the Ruland RSC13-4-4-A slit coupling?
The Ruland RSC13-4-4-A is a short clamp-on slit coupling with a 1/4 in bore diameter on both ends and an overall length of 27/32 in. It is made from inch-series materials and designed for zero-backlash torque transmission in light-duty motion-control applications.
Where to buy Ruland Manufacturing couplings worldwide?
3G Electric supplies Ruland Manufacturing couplings worldwide. As a global industrial distributor, we handle full logistics, customs clearance, and delivery to your site. Contact us for availability and lead time on the RSC13-4-4-A or other Ruland motion-control components.
How to install a Ruland clamp-on slit coupling?
To install a Ruland clamp-on slit coupling, align the two shaft ends within the bore, then tighten the clamp screws evenly to the manufacturer’s recommended torque. Ensure shafts are clean and free of burrs. Avoid over-tightening, which can distort the coupling and reduce performance.
Digunakan dalam
Aplikasi umum untuk RULAND MANUFACTURINGRULAND MANUFACTURING Produk
3G Electric memasok RULAND MANUFACTURING short clamp-on slit couplings. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
