RULAND MANUFACTURING Disc Coupling: 25 mm x 25 mm Bore Dia, 69.9 mm OD, Round
The RULAND MANUFACTURING Disc Coupling (MPN MDCD70-25-25-A) is a double disc coupling for round shafts with a 25 mm x 25 mm bore diameter and 69.9 mm OD. It features a clamp-on design, an aluminum hub and center…
SKU 3G-OTH-145337
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The RULAND MANUFACTURING Disc Coupling (MPN MDCD70-25-25-A) is a double disc coupling for round shafts with a 25 mm x 25 mm bore diameter and 69.9 mm OD. It features a clamp-on design, an aluminum hub and center spacer, and stainless steel discs. The coupling has 2 discs with a center spacer, is metric, and has same bore dimensions.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is a RULAND MANUFACTURING disc coupling used for?
A RULAND MANUFACTURING disc coupling connects two rotating shafts while accommodating misalignment. This double disc coupling with a center spacer is used in precision motion control, packaging, and automation equipment where zero backlash and high torsional stiffness are required.
What are the specifications of the RULAND MANUFACTURING MDCD70-25-25-A disc coupling?
The RULAND MANUFACTURING MDCD70-25-25-A is a double disc coupling with a 25 mm x 25 mm bore diameter, 69.9 mm OD, and clamp-on round design. It has an aluminum hub and center spacer with stainless steel discs, is metric, and has same bore dimensions.
Where to buy a RULAND MANUFACTURING disc coupling worldwide?
3G Electric supplies and delivers the RULAND MANUFACTURING MDCD70-25-25-A disc coupling worldwide. As a global industrial solutions provider, we handle full logistics and customs clearance to ensure your order arrives at your facility, wherever it is located.
How to install a RULAND MANUFACTURING clamp-on disc coupling?
To install a RULAND MANUFACTURING clamp-on disc coupling, clean both shaft ends and the bore. Loosen the clamp screws, slide the coupling onto the shafts, align the equipment, then tighten the screws evenly to the manufacturer's recommended torque. Avoid over-tightening to prevent disc damage.
Digunakan dalam
Aplikasi umum untuk RULAND MANUFACTURINGRULAND MANUFACTURING Produk
3G Electric memasok RULAND MANUFACTURING double disc couplings for round shafts. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
