RULAND MANUFACTURING Bellows Coupling: 1/2 in Bore Dia 1, 10 mm Bore Dia 2
The RULAND MANUFACTURING Bellows Coupling (MPN BCK26-1/2"-10MM-A) is a clamp-on bellows shaft coupling for keyed shafts, constructed from stainless steel. It features an inch to metric bore configuration with a 1/2…
SKU 3G-OTH-134961
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The RULAND MANUFACTURING Bellows Coupling (MPN BCK26-1/2"-10MM-A) is a clamp-on bellows shaft coupling for keyed shafts, constructed from stainless steel. It features an inch to metric bore configuration with a 1/2 in bore diameter 1 and a 10 mm bore diameter 2, both having the same bore dimensions. This coupling has a maximum speed of 10,000 RPM and does not include a keyway.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is a RULAND MANUFACTURING bellows coupling used for?
This stainless steel clamp-on bellows coupling connects a 1/2 in keyed shaft to a 10 mm keyed shaft, compensating for misalignment while transmitting torque. It is used in precision motion control, servo systems, and industrial machinery where zero backlash and high torsional stiffness are required.
What are the specifications of the RULAND MANUFACTURING BCK26-1/2"-10MM-A?
This RULAND MANUFACTURING coupling has a 1/2 in bore diameter 1 and a 10 mm bore diameter 2, both with the same bore dimensions. It is made of stainless steel, has a maximum speed of 10,000 RPM, and does not include a keyway. The part number is BCK26-1/2"-10MM-A.
Where to buy a RULAND MANUFACTURING bellows coupling worldwide?
3G Electric supplies and delivers the RULAND MANUFACTURING BCK26-1/2"-10MM-A bellows coupling worldwide. As a global industrial solutions provider, we handle full logistics and customs clearance to ensure your order arrives at your facility, wherever it is located.
How to install a clamp-on bellows coupling for keyed shafts?
Ensure both shaft ends are clean and free of burrs. Slide the coupling onto the shafts, aligning the clamp screws over the keyways. Tighten the clamp screws evenly to the manufacturer's recommended torque using a torque wrench. Verify alignment and run the system at low speed to check for vibration.
Digunakan dalam
Aplikasi umum untuk RULAND MANUFACTURINGRULAND MANUFACTURING Produk
3G Electric memasok RULAND MANUFACTURING clamp-on bellows shaft couplings for keyed shafts. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
