SCHNEIDER Control Relay: DIN-Rail & Surface Relay Mounting, 480V AC Coil Volt, 3NO/2NC
The SCHNEIDER IEC Control Relay (MPN CAD32T7) is a DIN-Rail and surface-mount relay with a 3NO/2NC contact configuration rated at 10 A and a 480V AC coil voltage. 3G Electric interprets this demand and delivers the…
SKU 3G-OTH-37365
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The SCHNEIDER IEC Control Relay (MPN CAD32T7) is a DIN-Rail and surface-mount relay with a 3NO/2NC contact configuration rated at 10 A and a 480V AC coil voltage. 3G Electric interprets this demand and delivers the genuine SCHNEIDER part across 14 industrial departments, with specialist depth in controls as an authorised distributor.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is the SCHNEIDER CAD32T7 IEC control relay used for?
The SCHNEIDER CAD32T7 IEC control relay is used for switching and controlling electrical loads in industrial automation, motor control centers, and panel building. Its 3NO/2NC contact configuration and 10 A rating suit general-purpose control circuits, conveyor systems, and pump controls.
What are the specifications of the SCHNEIDER CAD32T7 relay?
The SCHNEIDER CAD32T7 is an IEC control relay with a 480V AC coil voltage, 3 normally open and 2 normally closed contacts rated at 10 A. It mounts on DIN rail or surface, and is part of the TeSys D series. The manufacturer part number is CAD32T7.
Where to buy the SCHNEIDER CAD32T7 relay worldwide?
You can source the SCHNEIDER CAD32T7 relay through 3G Electric, a global industrial equipment distributor. We handle full logistics, customs clearance, and delivery to worldwide destinations. Contact us for availability and lead time on this DIN-rail mounted relay.
How to install the SCHNEIDER CAD32T7 control relay?
Mount the SCHNEIDER CAD32T7 relay on a standard 35 mm DIN rail or surface using the provided clip. Wire the coil to 480V AC and connect load circuits to the 3NO/2NC terminals rated at 10 A. Ensure proper torque per the terminal markings and follow local electrical codes.
Digunakan dalam
Aplikasi umum untuk SCHNEIDERSCHNEIDER Produk
3G Electric memasok SCHNEIDER din rail-mounted relays. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
