SCHNEIDER Supplementary Protector: 63 A Amps, 250V DC, 5kA at 250V DC, Screw Clamp
The SCHNEIDER IEC Supplementary Protector is a DC-only rated, 1-pole UL1077 DIN rail-mount supplementary protector from the C60H-DC series, with a 63 A amp rating. It features a C curve type, a maximum AIR rating of…
SKU 3G-OTH-19671
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The SCHNEIDER IEC Supplementary Protector is a DC-only rated, 1-pole UL1077 DIN rail-mount supplementary protector from the C60H-DC series, with a 63 A amp rating. It features a C curve type, a maximum AIR rating of 5kA at 250V DC, and a DC voltage rating of 250V DC, with screw clamp terminal connections (MPN M9U21163). This device is not rated for AC voltage.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is the SCHNEIDER C60H-DC supplementary protector used for?
The SCHNEIDER C60H-DC supplementary protector (MPN M9U21163) protects DC circuits from overcurrents and short circuits. It is used in industrial control panels, solar arrays, and battery systems where reliable DC-only protection is required. 3G Electric supplies this device globally.
What are the specifications of the SCHNEIDER M9U21163?
The SCHNEIDER M9U21163 is a 1-pole UL1077 supplementary protector rated 63 A at 250V DC. It has a C curve type, a maximum AIR rating of 5kA at 250V DC, and screw clamp terminals. It is not rated for AC voltage and mounts on a DIN rail.
Where to buy the SCHNEIDER C60H-DC 63A supplementary protector worldwide?
3G Electric supplies the SCHNEIDER C60H-DC 63A supplementary protector (M9U21163) to customers worldwide. We handle full logistics, customs clearance, and delivery to your site. Contact us for pricing and lead time on this DC-rated protector.
How to install a SCHNEIDER C60H-DC supplementary protector?
Mount the SCHNEIDER C60H-DC on a standard DIN rail, ensuring the DC supply is off. Connect wires to the screw clamp terminals per the torque spec in the datasheet. Verify polarity and that the system voltage does not exceed 250V DC. Test operation after installation.
Digunakan dalam
Aplikasi umum untuk SCHNEIDERSCHNEIDER Produk
3G Electric memasok SCHNEIDER dc-only rated, 1-pole ul1077 din rail-mount supplementary protectors. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.















