SCHNEIDER Supplementary Protector: 4 A Amps, 500V DC, 5kA at 250V DC, Screw Clamp
The SCHNEIDER IEC Supplementary Protector is a DC-only rated, 2-pole UL1077 DIN rail-mount supplementary protector from the C60H-DC series, with a 4 A amp rating and a C curve type. It is rated for 500V DC with a…
SKU 3G-OTH-22512
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The SCHNEIDER IEC Supplementary Protector is a DC-only rated, 2-pole UL1077 DIN rail-mount supplementary protector from the C60H-DC series, with a 4 A amp rating and a C curve type. It is rated for 500V DC with a maximum AIR rating of 5kA at 250V DC, and features screw clamp terminals. This device is not rated for AC voltage.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is the SCHNEIDER C60H-DC supplementary protector used for?
The SCHNEIDER C60H-DC supplementary protector is used for DC circuit protection in industrial control panels, solar arrays, and battery systems. It is a 2-pole UL1077 device rated for 500V DC with a 4 A amp rating and C curve, providing overcurrent protection for DC-only circuits.
What are the specifications of the SCHNEIDER M9U21204 supplementary protector?
The SCHNEIDER M9U21204 is a 4 A, 500V DC supplementary protector with a C curve type and 5kA interrupting rating at 250V DC. It features screw clamp terminals, is not rated for AC, and mounts on a DIN rail. It is part of the C60H-DC series and complies with UL1077.
Where to buy SCHNEIDER C60H-DC supplementary protectors worldwide?
You can source SCHNEIDER C60H-DC supplementary protectors from 3G Electric, a global industrial equipment distributor. We handle full logistics, customs clearance, and delivery to worldwide destinations. Contact us for availability and lead time on the M9U21204 model.
How to install a SCHNEIDER C60H-DC supplementary protector on a DIN rail?
To install the SCHNEIDER C60H-DC supplementary protector, snap it onto a standard 35 mm DIN rail. Ensure the DC supply is off, connect wires to the screw clamp terminals per the wiring diagram, and torque to the specified value. The C curve provides magnetic trip for moderate inrush currents.
Digunakan dalam
Aplikasi umum untuk SCHNEIDERSCHNEIDER Produk
3G Electric memasok SCHNEIDER dc-only rated, 2-pole ul1077 din rail-mount supplementary protectors. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.















