SEALMASTER 2 Bolt Flange Bearing: Radial Ball, 15/16 in Bore, Cast Iron
The SEALMASTER SFT-15 is a general purpose 2-bolt flange-mount ball bearing with a 15/16 in cylindrical bore and a cast iron housing. It features set-screw locking and is lubricated with NLGI #2 equivalent grease…
SKU 3G-OTH-107980
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The SEALMASTER SFT-15 is a general purpose 2-bolt flange-mount ball bearing with a 15/16 in cylindrical bore and a cast iron housing. It features set-screw locking and is lubricated with NLGI #2 equivalent grease. This inch-system unit uses a 3/8 in mounting bolt and is designed for radial load applications.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is the SEALMASTER SFT-15 2 bolt flange bearing used for?
The SEALMASTER SFT-15 is a general purpose flange-mount ball bearing used to support rotating shafts in radial load applications. It is commonly found on conveyors, fans, and agricultural equipment where a compact, bolt-on mounting solution is needed.
What are the specifications of the SEALMASTER SFT-15 bearing?
The SEALMASTER SFT-15 has a 15/16 in cylindrical bore, a cast iron housing, and set-screw locking. It uses NLGI #2 equivalent grease, a 3/8 in mounting bolt, and is an inch-system unit. The overall length is 5 1/8 in.
Where to buy the SEALMASTER SFT-15 bearing worldwide?
You can source the SEALMASTER SFT-15 bearing through 3G Electric, a global industrial equipment distributor. We handle full logistics, customs clearance, and delivery to worldwide destinations, ensuring the bearing reaches your facility reliably.
How to install a SEALMASTER 2 bolt flange bearing?
To install, first ensure the shaft is clean and free of burrs. Slide the bearing onto the shaft, align the flange bolt holes with the mounting surface, and tighten the 3/8 in bolts evenly. Then secure the set screws against the shaft using a hex key. Lubrication is factory-applied.
Digunakan dalam
Aplikasi umum untuk SEALMASTERSEALMASTER Produk
3G Electric memasok SEALMASTER general purpose flange-mount ball bearings. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
