SHARPE Manual Two-Way Ball Valve: 1 1/2 in, Carbon Steel, Straight, FNPT x FNPT
The SHARPE Manual Two-Way Ball Valve (MPN 4353010480) is a carbon steel ball valve with a 1 1/2 inch full port, straight configuration, and FNPT x FNPT connections. It features a locking lever handle for manual…
SKU 3G-OTH-437610
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The SHARPE Manual Two-Way Ball Valve (MPN 4353010480) is a carbon steel ball valve with a 1 1/2 inch full port, straight configuration, and FNPT x FNPT connections. It features a locking lever handle for manual operation.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is the SHARPE Manual Two-Way Ball Valve used for?
The SHARPE Manual Two-Way Ball Valve is used for on/off flow control in industrial piping systems handling liquids, gases, or steam. Its carbon steel body and full-port design make it suitable for oil and gas, chemical processing, and water treatment applications where minimal pressure drop and reliable shutoff are required.
What are the specifications of the SHARPE 4353010480 ball valve?
The SHARPE 4353010480 is a manual two-way ball valve with a 1 1/2 inch full port, straight configuration, and FNPT x FNPT connections. It is made of carbon steel and features a locking lever handle for secure operation. The full-port design allows unrestricted flow, reducing pressure loss in the line.
Where to buy the SHARPE 4353010480 ball valve worldwide?
You can source the SHARPE 4353010480 ball valve through 3G Electric, a global industrial equipment distributor. We handle full logistics, customs clearance, and delivery to worldwide destinations. Contact us for availability and lead time; we provide competitive pricing and reliable supply for this SHARPE carbon steel ball valve.
How to install a SHARPE manual ball valve?
To install a SHARPE manual ball valve, ensure the pipeline is clean and the valve is in the fully open position. Apply thread sealant to the FNPT connections and tighten to the recommended torque. After installation, cycle the locking lever handle to verify smooth operation and check for leaks at the joints before pressurizing the system.
Digunakan dalam
Aplikasi umum untuk SHARPESHARPE Produk
3G Electric memasok SHARPE carbon steel ball valves. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
