Siemens Supplementary Protector: 10 A Amps, 5kA at 400V AC, Screw Clamp, 5SY6, 400V AC
The SIEMENS IEC Supplementary Protector is a C-Curve, 2-Pole UL1077 DIN Rail-Mount Supplementary Protector rated at 10 A Amps. It features a 5kA at 400V AC maximum AIR rating, 400V AC voltage rating, and screw clamp…
SKU 3G-OTH-20851
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The SIEMENS IEC Supplementary Protector is a C-Curve, 2-Pole UL1077 DIN Rail-Mount Supplementary Protector rated at 10 A Amps. It features a 5kA at 400V AC maximum AIR rating, 400V AC voltage rating, and screw clamp terminal connection, part of the 5SY6 series (MPN 5SY62107). This device is not rated for DC voltage.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is the SIEMENS 5SY62107 supplementary protector used for?
The SIEMENS 5SY62107 is a C-curve, 2-pole supplementary protector rated at 10 A and 400V AC. It is used in industrial control panels, HVAC equipment, and machinery to protect branch circuits against overloads and short circuits, typically mounted on DIN rails.
What are the specifications of the SIEMENS 5SY62107?
The SIEMENS 5SY62107 is a 10 A, 2-pole supplementary protector with a C-curve trip characteristic. It has a maximum AIR rating of 5kA at 400V AC, a 400V AC voltage rating, and screw clamp terminals. It is part of the 5SY6 series and is not rated for DC voltage.
Where to buy the SIEMENS 5SY62107 worldwide?
You can source the SIEMENS 5SY62107 through 3G Electric, a global industrial equipment distributor. We handle full logistics, customs clearance, and delivery to worldwide destinations. Contact us for availability and lead time on this supplementary protector.
How to install the SIEMENS 5SY62107 on a DIN rail?
To install the SIEMENS 5SY62107, snap it onto a standard 35 mm DIN rail. Ensure the rail is clean and the device clips securely. Connect wires to the screw clamp terminals using a screwdriver, tightening to the torque specified in the product manual. Always de-energize the circuit before installation.
Digunakan dalam
Aplikasi umum untuk SiemensSiemens Produk
3G Electric memasok Siemens c-curve, 2-pole ul1077 din rail-mount supplementary protectors. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.















