Kami mengirim ke Indonesia — pintu ke pintu, bea cukai dan logistik ditangani oleh 3G Electric

3G Electric
Keranjang Permintaan PenawaranMinta PenawaranMasukDaftar
Siemens 5SY4 Series D-Curve 1-Pole UL1077 Supplementary Protector - D-Curve, 1-Pole UL1077 DIN Rail-Mount Supplementary Protectors
SiemensD-Curve, 1-Pole UL1077 DIN Rail-Mount Supplementary Protectors

Siemens 5SY4 Series D-Curve 1-Pole UL1077 Supplementary Protector

Siemens IEC Supplementary Protector seri 5SY4 adalah pengaman sirkit tambahan (supplementary protector) 10 Amps dengan kurva D, 1 kutub, yang dirancang untuk pemasangan di rel DIN sesuai standar UL1077. Produk ini…

SKU 3G-OTH-20484

Merek
Siemens
Item
5SY4 Series D-Curve 1-Pole UL1077 Supplementary Protector
Kategori
D-Curve, 1-Pole UL1077 DIN Rail-Mount Supplementary Protectors
Tersedia untuk Dipesan
Stok tersedia & bea cukai ditangani
  • 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
  • Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
  • Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Harga dagang sesuai penawaran — balasan dalam 24 jam
Jumlah
WhatsApp seorang insinyurMessage via Telegram
Tidak perlu akun — permintaan penawaran Anda langsung masuk ke tim insinyur kami. Akun gratis memungkinkan Anda melacak penawaran dan memesan ulang lebih cepat.
Pengiriman ke Seluruh Dunia
Pengiriman udara & laut
Lembar Data Atas Permintaan
Spesifikasi teknis
Penawaran 1 Hari
Balasan dalam 24 jam

Local availability & support — Indonesia

Phone
+65 8878 8355

Spesifikasi Teknis

Siemens
Manufacturer Part Number
5SY41108
Series
5SY4
Type
10kA at 230/400V AC, Screw Clamp, 5SY4, D
DC
72V
Curve Type
D
Max. AIR Rating
10kA at 230/400V AC
AC Voltage Rating
230/400V AC
DC Voltage Rating
72V DC
Terminal Connection
Screw Clamp

Dokumen Teknis

Tidak ada dokumen teknis yang tersedia untuk produk ini.
Minta dokumentasi →
Tidak yakin ini adalah suku cadang yang tepat? Minta rekomendasi.

Butuh bantuan pemasangan atau rekayasa?

Instalasi, komisioning, rencana pemeliharaan, desain sistem, dan penawaran produk + layanan bundel — satu tim menangani cakupan penuh.
Bicaralah dengan seorang insinyur

Ajukan pertanyaan

Siemens Produk
3G Electric (S) Pte. Ltd. — Singapore

Deskripsi Produk

Siemens IEC Supplementary Protector seri 5SY4 adalah pengaman sirkit tambahan (supplementary protector) 10 Amps dengan kurva D, 1 kutub, yang dirancang untuk pemasangan di rel DIN sesuai standar UL1077. Produk ini memiliki rating pemutusan maksimum 10kA pada 230/400V AC dan tegangan DC 72V, dengan koneksi terminal tipe screw clamp. Siemens 5SY41108 cocok digunakan sebagai proteksi sirkit pada peralatan industri, panel kontrol, dan sistem distribusi listrik di Indonesia.

Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.

Pertanyaan yang Sering Diajukan

Apa fungsi Siemens IEC Supplementary Protector 5SY41108?

Siemens 5SY41108 berfungsi sebagai pengaman sirkit tambahan (supplementary protector) untuk melindungi peralatan listrik dari arus lebih dan hubung singkat. Produk ini memiliki rating 10 Amps, kurva D, 1 kutub, dengan tegangan AC 230/400V dan DC 72V, serta kemampuan pemutusan 10kA.

Apa spesifikasi teknis Siemens 5SY41108?

Spesifikasi Siemens 5SY41108 meliputi: arus 10 A, kurva D, 1 kutub, tegangan AC 230/400V, tegangan DC 72V, rating pemutusan maksimum 10kA pada 230/400V AC, koneksi screw clamp, dan pemasangan di rel DIN. Produk ini memenuhi standar UL1077.

Di mana beli Siemens 5SY41108 di Indonesia?

Anda dapat membeli Siemens 5SY41108 melalui 3G Electric, distributor resmi yang memasok dan mengirimkan produk ini ke seluruh Indonesia. Kami menangani logistik dan bea cukai untuk memastikan produk sampai ke lokasi Anda dengan aman.

Apa perbedaan kurva D pada Siemens 5SY4?

Kurva D pada Siemens 5SY4 dirancang untuk aplikasi dengan arus start tinggi, seperti motor listrik dan transformator. Kurva ini memiliki karakteristik trip yang lebih lambat pada arus lebih dibanding kurva B atau C, sehingga cocok untuk beban induktif.

Digunakan dalam

Aplikasi umum untuk Siemens
District cooling plants — LME73 + RWF55 for condenser-water modulation
Inflight catering and food-processing steam boilers — LMG22 with SQN90 air-fuel cross-damper
Hospital steam-plant redundancy — LME41 with QRA2 UV flame detection for dual-fuel boilers
Semiconductor fab process heat — LME23 and SKP55 gas valves on hot-oil heater skids
Container-terminal reefer-deck heating — LMG22 retrofit onto legacy burner racks

Siemens Produk

3G Electric memasok Siemens d-curve, 1-pole ul1077 din rail-mount supplementary protectors. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.

Anda mungkin juga membutuhkan

Pembakar & Pembakaran →Pompa & Kompresor →Suku Cadang →Semua Produk →

Compatible alternatives & equivalents

Cross-referenced by specification & description
This 1-pole supplementary protector features a D-curve for high-inrush loads. Rated 50A, it provides 10kA interrupting capacity at 230/400V AC and 72V DC. Suitable for branch circuit protection in control panels, HVAC, and machinery. Terminal connection via screw clamp
Siemens
This 1-pole supplementary protector features a D-curve for high-inrush loads. Rated 50A, it provides 10kA interrupting capacity at 230/400V AC and 72V DC. Suitable for branch circuit protection in control panels, HVAC, and machinery. Terminal connection via screw clamp
This 1-pole supplementary protector from the Siemens 5SY4 series features a D-curve for high inrush immunity, rated 20A with a maximum AIR of 10kA at 230/400V AC and 72V DC. It uses screw clamp terminals and mounts on DIN rail, suitable for overcurrent and short-circuit protection in industrial control circuits, lighting, and small motor loads
Siemens
This 1-pole supplementary protector from the Siemens 5SY4 series features a D-curve for high inrush immunity, rated 20A with a maximum AIR of 10kA at 230/400V AC and 72V DC. It uses screw clamp terminals and mounts on DIN rail, suitable for overcurrent and short-circuit protection in industrial control circuits, lighting, and small motor loads
D-curve, 1-pole supplementary protector rated 3 A with screw clamp terminals. Provides overcurrent protection for branch circuits and equipment in industrial control panels, HVAC systems, and lighting applications. Suitable for high-inrush loads such as motors and transformers. AC voltage rating 230/400V AC, DC voltage rating 72V DC, interrupting rating 10kA at 230/400V AC
Siemens
D-curve, 1-pole supplementary protector rated 3 A with screw clamp terminals. Provides overcurrent protection for branch circuits and equipment in industrial control panels, HVAC systems, and lighting applications. Suitable for high-inrush loads such as motors and transformers. AC voltage rating 230/400V AC, DC voltage rating 72V DC, interrupting rating 10kA at 230/400V AC
This 1-pole supplementary protector from the Siemens 5SY4 series features a D-curve characteristic for high-inrush loads such as transformers and small motors. Rated at 2 A with a maximum interrupting rating of 10kA at 230/400V AC and 72V DC, it uses screw clamp terminals for secure wiring. The device mounts on a DIN rail and is UL1077 listed for branch-circuit protection in industrial control circuits, HVAC equipment, and motor starters
Siemens
This 1-pole supplementary protector from the Siemens 5SY4 series features a D-curve characteristic for high-inrush loads such as transformers and small motors. Rated at 2 A with a maximum interrupting rating of 10kA at 230/400V AC and 72V DC, it uses screw clamp terminals for secure wiring. The device mounts on a DIN rail and is UL1077 listed for branch-circuit protection in industrial control circuits, HVAC equipment, and motor starters
This 1-pole supplementary protector features a D-curve trip characteristic, rated 25 A with a maximum interrupting rating of 10kA at 230/400V AC and 72V DC. It uses screw-clamp terminals and mounts on a DIN rail, complying with UL1077. Suitable for overcurrent protection in industrial control circuits and equipment where branch-circuit protection is not required
Siemens
This 1-pole supplementary protector features a D-curve trip characteristic, rated 25 A with a maximum interrupting rating of 10kA at 230/400V AC and 72V DC. It uses screw-clamp terminals and mounts on a DIN rail, complying with UL1077. Suitable for overcurrent protection in industrial control circuits and equipment where branch-circuit protection is not required
This 1-pole supplementary protector features a D-curve trip characteristic for high inrush currents, rated 16A with AC voltage 230/400V and DC voltage 72V. It has a maximum interrupting rating of 10kA at 230/400V AC and uses screw clamp terminals. Designed for DIN rail mounting, it is suitable for overcurrent and short-circuit protection in control circuits and equipment
Siemens
This 1-pole supplementary protector features a D-curve trip characteristic for high inrush currents, rated 16A with AC voltage 230/400V and DC voltage 72V. It has a maximum interrupting rating of 10kA at 230/400V AC and uses screw clamp terminals. Designed for DIN rail mounting, it is suitable for overcurrent and short-circuit protection in control circuits and equipment

Lainnya dari Siemens

Lihat semua Siemens suku cadang →
Siemens 5SY4 series supplementary protector, 1-pole, D-curve, rated 6 A. Provides overcurrent protection with a maximum AIR rating of 10kA at 230/400V AC and 72V DC. Features screw clamp terminals and mounts on DIN rail. Suitable for industrial control panels and equipment with high inrush currents
Siemens
Siemens 5SY4 series supplementary protector, 1-pole, D-curve, rated 6 A. Provides overcurrent protection with a maximum AIR rating of 10kA at 230/400V AC and 72V DC. Features screw clamp terminals and mounts on DIN rail. Suitable for industrial control panels and equipment with high inrush currents
D-curve, 1-pole supplementary protector rated 0.5 A, 230/400V AC and 72V DC, with 10kA interrupting capacity. Screw clamp terminals. For overcurrent protection in control circuits, instrumentation, and automation equipment
Siemens
D-curve, 1-pole supplementary protector rated 0.5 A, 230/400V AC and 72V DC, with 10kA interrupting capacity. Screw clamp terminals. For overcurrent protection in control circuits, instrumentation, and automation equipment
This 1-pole supplementary protector from the Siemens 5SY4 series features a D-curve trip characteristic and a rated current of 1 A. It is designed for DIN rail mounting and provides overcurrent protection with a maximum interrupting rating of 10 kA at 230/400 V AC and a DC voltage rating of 72 V. The screw clamp terminals facilitate secure wiring connections in control panels and industrial equipment
Siemens
This 1-pole supplementary protector from the Siemens 5SY4 series features a D-curve trip characteristic and a rated current of 1 A. It is designed for DIN rail mounting and provides overcurrent protection with a maximum interrupting rating of 10 kA at 230/400 V AC and a DC voltage rating of 72 V. The screw clamp terminals facilitate secure wiring connections in control panels and industrial equipment
DIN rail-mount supplementary protector with D-curve characteristic for overcurrent and short-circuit protection. Rated 0.3 A, 230/400V AC (10kA interrupting capacity) and 72V DC. Screw clamp terminals. Suitable for use in control panels, HVAC systems, and machinery
Siemens
DIN rail-mount supplementary protector with D-curve characteristic for overcurrent and short-circuit protection. Rated 0.3 A, 230/400V AC (10kA interrupting capacity) and 72V DC. Screw clamp terminals. Suitable for use in control panels, HVAC systems, and machinery
This 1-pole supplementary protector with D-curve characteristic is rated 40A, 72V DC, and 10kA at 230/400V AC. It features screw clamp terminals and mounts on DIN rail. Suitable for overcurrent and short-circuit protection in branch circuits and equipment, commonly used in control panels and machinery
Siemens
This 1-pole supplementary protector with D-curve characteristic is rated 40A, 72V DC, and 10kA at 230/400V AC. It features screw clamp terminals and mounts on DIN rail. Suitable for overcurrent and short-circuit protection in branch circuits and equipment, commonly used in control panels and machinery
1-pole D-curve supplementary protector rated 13A, 230/400V AC and 72V DC, with 10kA interrupting capacity at 230/400V AC. Screw clamp terminals. Suitable for branch circuit and equipment protection in control panels, HVAC, and automation systems where high inrush loads occur
Siemens
1-pole D-curve supplementary protector rated 13A, 230/400V AC and 72V DC, with 10kA interrupting capacity at 230/400V AC. Screw clamp terminals. Suitable for branch circuit and equipment protection in control panels, HVAC, and automation systems where high inrush loads occur
This 1-pole supplementary protector features a D-curve trip characteristic and a rated current of 1.6 A. It is designed for DIN rail mounting and uses screw clamp terminals. The device is rated for 10kA at 230/400V AC and 72V DC, suitable for protecting industrial control circuits, HVAC equipment, and motor branch circuits against overloads and short circuits
Siemens
This 1-pole supplementary protector features a D-curve trip characteristic and a rated current of 1.6 A. It is designed for DIN rail mounting and uses screw clamp terminals. The device is rated for 10kA at 230/400V AC and 72V DC, suitable for protecting industrial control circuits, HVAC equipment, and motor branch circuits against overloads and short circuits
1-pole DIN rail-mount supplementary protector with D-curve characteristic, rated 4A. Suitable for overload and short-circuit protection in industrial control circuits, HVAC equipment, and panelboards. AC voltage rating 230/400V, DC voltage rating 72V. Maximum interrupting capacity 10kA at 230/400V AC. Screw clamp terminals. UL1077 listed
Siemens
1-pole DIN rail-mount supplementary protector with D-curve characteristic, rated 4A. Suitable for overload and short-circuit protection in industrial control circuits, HVAC equipment, and panelboards. AC voltage rating 230/400V, DC voltage rating 72V. Maximum interrupting capacity 10kA at 230/400V AC. Screw clamp terminals. UL1077 listed