SIEMENS IEC Supplementary Protector: 16 A Amps, 72V DC, 10kA at 400V AC, Screw Clamp
The SIEMENS IEC Supplementary Protector (MPN 5SY44165) is a 16 A, A-Curve, 4-Pole UL1077 DIN Rail-Mount supplementary protector from the 5SY4 series. It is rated for 72V DC and has a breaking capacity of 10kA at 400V…
SKU 3G-OTH-127843
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The SIEMENS IEC Supplementary Protector (MPN 5SY44165) is a 16 A, A-Curve, 4-Pole UL1077 DIN Rail-Mount supplementary protector from the 5SY4 series. It is rated for 72V DC and has a breaking capacity of 10kA at 400V AC, with screw clamp terminals.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is the SIEMENS IEC Supplementary Protector 5SY44165 used for?
The SIEMENS IEC Supplementary Protector 5SY44165 is used for overcurrent protection in industrial control panels, HVAC equipment, and machinery. Its A-Curve trip characteristic suits resistive loads and low-inrush circuits. As a UL1077 supplementary protector, it is installed on DIN rails in branch circuits where a full circuit breaker is not required.
What are the specifications of the SIEMENS 5SY44165 supplementary protector?
The SIEMENS 5SY44165 is a 16 A, A-Curve, 4-Pole supplementary protector from the 5SY4 series. It is rated for 72V DC and has a breaking capacity of 10kA at 400V AC. Terminals are screw clamp type. It is UL1077 listed for DIN-rail mounting and manufactured by SIEMENS.
Where to buy the SIEMENS 5SY44165 supplementary protector worldwide?
You can source the SIEMENS 5SY44165 supplementary protector through 3G Electric, a global industrial equipment distributor. We handle full logistics, customs clearance, and delivery to worldwide destinations. Contact us for availability and lead time; we provide competitive pricing and reliable supply for this SIEMENS 5SY4 series protector.
How to install the SIEMENS 5SY44165 supplementary protector on a DIN rail?
To install the SIEMENS 5SY44165, snap it onto a standard 35 mm DIN rail. Ensure the rail is clean and the protector clips engage firmly. Connect wires to the screw clamp terminals using the correct torque per SIEMENS guidelines. Verify the system is de-energized before installation. This A-Curve protector is for supplementary overcurrent protection only.
Digunakan dalam
Aplikasi umum untuk SIEMENS IECSIEMENS IEC Produk
3G Electric memasok SIEMENS IEC a-curve, 4-pole ul1077 din rail-mount supplementary protectors. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.















