SIEMENS IEC Supplementary Protector: 20 A Amps, 72V DC, 10kA at 400V AC, Screw Clamp
The SIEMENS IEC Supplementary Protector (SKU 30XW16, MPN 5SY44208) is a 20 A, D-Curve, 4-pole UL1077 DIN rail-mount supplementary protector from the 5SY4 series. It features a 72V DC rating, a 10kA interrupting…
SKU 3G-OTH-154298
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The SIEMENS IEC Supplementary Protector (SKU 30XW16, MPN 5SY44208) is a 20 A, D-Curve, 4-pole UL1077 DIN rail-mount supplementary protector from the 5SY4 series. It features a 72V DC rating, a 10kA interrupting capacity at 400V AC, and screw clamp terminals.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is the SIEMENS IEC Supplementary Protector 5SY44208 used for?
The SIEMENS IEC Supplementary Protector 5SY44208 is used for overcurrent protection in industrial control panels, HVAC equipment, and machinery. Its D-curve trip characteristic handles high inrush loads like motors and transformers. It mounts on DIN rails and is UL1077 listed for branch circuit protection.
What are the specifications of the SIEMENS 5SY44208 supplementary protector?
The SIEMENS 5SY44208 is a 20 A, 4-pole supplementary protector with a D-curve. It is rated 400V AC and 72V DC, with a 10kA interrupting capacity at 400V AC. Terminals are screw clamp type. It is part of the 5SY4 series and designed for DIN rail mounting per UL1077.
Where to buy the SIEMENS 5SY44208 supplementary protector worldwide?
You can source the SIEMENS 5SY44208 supplementary protector through 3G Electric, a global industrial equipment distributor. We handle full logistics, customs clearance, and delivery to worldwide destinations. Contact us for availability and lead time on this item.
How to install the SIEMENS 5SY44208 supplementary protector on a DIN rail?
To install the SIEMENS 5SY44208, snap it onto a standard 35 mm DIN rail until it locks. Connect phase conductors to screw clamp terminals using a torque screwdriver per SIEMENS specifications. Ensure the D-curve matches your load's inrush current. Always de-energize the circuit before installation.
Digunakan dalam
Aplikasi umum untuk SIEMENS IECSIEMENS IEC Produk
3G Electric memasok SIEMENS IEC d-curve, 4-pole ul1077 din rail-mount supplementary protectors. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.















