SKF Rotary Shaft Seal: 1 Lip w/Spring, CRW1, Nitrile, 1.494 in ID, 2.06 in OD
The SKF Rotary Shaft Seal is a single-lip oil seal with a metal case for smooth bores, part of the CRW1 seal design. This inch-system seal has a 1.494-inch inside diameter, a 2.06-inch outside diameter, and a…
SKU 3G-OTH-124027
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The SKF Rotary Shaft Seal is a single-lip oil seal with a metal case for smooth bores, part of the CRW1 seal design. This inch-system seal has a 1.494-inch inside diameter, a 2.06-inch outside diameter, and a 0.27-inch width, made of nitrile material (MPN 14789). It is a 1-lip seal with a spring, designed for rotary shaft applications.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is the SKF Rotary Shaft Seal CRW1 used for?
The SKF Rotary Shaft Seal CRW1 is used to retain lubricants and exclude contaminants in rotating shaft applications. It is commonly installed in gearboxes, pumps, motors, and industrial machinery where a single-lip seal with a spring provides reliable sealing against oil leakage and dirt ingress.
What are the specifications of the SKF Rotary Shaft Seal 14789?
The SKF Rotary Shaft Seal 14789 has a 1.494-inch inside diameter, a 2.06-inch outside diameter, and a 0.27-inch width. It features a single lip with a spring, a metal case for smooth bores, and is made of nitrile rubber. The seal design is CRW1, and it uses the inch system of measurement.
Where to buy SKF Rotary Shaft Seal 14789 worldwide?
You can source the SKF Rotary Shaft Seal 14789 through 3G Electric, a global industrial equipment distributor. We handle full logistics, customs clearance, and delivery to worldwide destinations. Contact us for availability and lead time; we supply genuine SKF seals for rotary shaft applications.
How to install an SKF CRW1 rotary shaft seal?
To install an SKF CRW1 seal, ensure the shaft and housing bore are clean and free of burrs. Lubricate the seal lip and shaft with compatible oil. Use a seal driver or press to apply even force on the seal's outer diameter, pressing it squarely into the bore until seated. Avoid damaging the sealing lip during installation.
Digunakan dalam
Aplikasi umum untuk SKFSKF Produk
3G Electric memasok SKF single-lip oil seals with metal cases for smooth bores. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
