Kami mengirim ke Indonesia — pintu ke pintu, bea cukai dan logistik ditangani oleh 3G Electric

3G Electric
Keranjang Permintaan PenawaranMinta PenawaranMasukDaftar
SKF Selongsong Aus: Untuk Rentang Diameter Poros 31,93 mm hingga 32,08 mm, Lebar 8 mm pada Poros - Wear Sleeves
SKFWear Sleeves

SKF Selongsong Aus: Untuk Rentang Diameter Poros 31,93 mm hingga 32,08 mm, Lebar 8 mm pada Poros

SKF Wear Sleeve adalah solusi perbaikan poros yang dirancang untuk mengembalikan permukaan poros yang aus tanpa perlu penggantian poros. Produk ini memiliki rentang diameter poros 31,93 mm hingga 32,08 mm, dengan…

SKU 3G-OTH-124488

Merek
SKF
Item
Selongsong Aus: Untuk Rentang Diameter Poros 31,93 mm hingga 32,08 mm, Lebar 8 mm pada Poros
Kategori
Wear Sleeves
Tersedia untuk Dipesan
Stok tersedia & bea cukai ditangani
  • 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
  • Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
  • Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Harga dagang sesuai penawaran — balasan dalam 24 jam
Jumlah
WhatsApp seorang insinyurMessage via Telegram
Tidak perlu akun — permintaan penawaran Anda langsung masuk ke tim insinyur kami. Akun gratis memungkinkan Anda melacak penawaran dan memesan ulang lebih cepat.
Pengiriman ke Seluruh Dunia
Pengiriman udara & laut
Lembar Data Atas Permintaan
Spesifikasi teknis
Penawaran 1 Hari
Balasan dalam 24 jam

Local availability & support — Indonesia

Phone
+65 8878 8355

Spesifikasi Teknis

SKF
Manufacturer Part Number
99128
Material
Stainless Steel
Overall Wd
11.13 mm
Wd On Shaft
8 mm

Dokumen Teknis

Tidak ada dokumen teknis yang tersedia untuk produk ini.
Minta dokumentasi →
Tidak yakin ini adalah suku cadang yang tepat? Minta rekomendasi.

Butuh bantuan pemasangan atau rekayasa?

Instalasi, komisioning, rencana pemeliharaan, desain sistem, dan penawaran produk + layanan bundel — satu tim menangani cakupan penuh.
Bicaralah dengan seorang insinyur

Ajukan pertanyaan

SKF Produk
3G Electric (S) Pte. Ltd. — Singapore

Deskripsi Produk

SKF Wear Sleeve adalah solusi perbaikan poros yang dirancang untuk mengembalikan permukaan poros yang aus tanpa perlu penggantian poros. Produk ini memiliki rentang diameter poros 31,93 mm hingga 32,08 mm, dengan lebar keseluruhan 11,13 mm dan lebar pada poros 8 mm. Terbuat dari Stainless Steel, wear sleeve ini cocok digunakan sebagai suku cadang pembakar atau peralatan industri yang memerlukan ketahanan aus tinggi.

Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.

Pertanyaan yang Sering Diajukan

Apa fungsi SKF Wear Sleeve 99128?

SKF Wear Sleeve 99128 berfungsi sebagai pelindung permukaan poros yang aus, memperpanjang umur poros tanpa perlu penggantian. Produk ini terbuat dari Stainless Steel, dengan rentang diameter poros 31,93 mm hingga 32,08 mm, lebar keseluruhan 11,13 mm, dan lebar pada poros 8 mm.

Apa spesifikasi SKF Wear Sleeve 99128?

Spesifikasi SKF Wear Sleeve 99128 meliputi material Stainless Steel, rentang diameter poros 31,93 mm hingga 32,08 mm, lebar keseluruhan 11,13 mm, dan lebar pada poros 8 mm. Produk ini dirancang untuk aplikasi perbaikan poros pada peralatan industri.

Di mana beli SKF Wear Sleeve 99128 di Indonesia?

Anda dapat membeli SKF Wear Sleeve 99128 melalui 3G Electric, distributor resmi yang memasok dan mengirimkan produk ini ke seluruh Indonesia. Kami menangani logistik dan bea cukai untuk memastikan produk sampai ke lokasi Anda dengan aman.

Bagaimana cara memilih SKF Wear Sleeve yang tepat?

Untuk memilih SKF Wear Sleeve yang tepat, pastikan rentang diameter poros sesuai dengan spesifikasi produk. SKF Wear Sleeve 99128 cocok untuk poros dengan diameter 31,93 mm hingga 32,08 mm. Periksa juga lebar keseluruhan 11,13 mm dan lebar pada poros 8 mm untuk memastikan kesesuaian.

Digunakan dalam

Aplikasi umum untuk SKF
Heavy machinery gearboxes — SKF spherical roller bearings (e.g., 24056 CCK30/W33) for high radial load capacity
Electric motor repair — SKF cylindrical roller bearings (e.g., NJ 307 ECP/C3) for free axial expansion
Pump shaft sealing — SKF CRWA1 rotary shaft seals (e.g., 17100) for fluid retention in rotating equipment
Conveyor system maintenance — SKF wear sleeves (e.g., 99274) to protect shafts from seal abrasion
Machine tool spindles — SKF angular contact bearings (e.g., 7413 BGBM) for axial load support in duplex sets
Industrial fan assemblies — SKF spherical roller bearings (e.g., 23044 CC/W33) for misalignment accommodation

SKF Produk

3G Electric memasok SKF wear sleeves. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.

Anda mungkin juga membutuhkan

Pembakar & Pembakaran →Pompa & Kompresor →Suku Cadang →Semua Produk →

Compatible alternatives & equivalents

Cross-referenced by specification & description
This lubricated general purpose metallic sleeve bearing is made from SAE 841 bronze with a 3/4 in bore, 1 in OD, and 1 in length. It has a maximum PV rating of 50,000 lb/sq in-fpm and is sold in packs of 5. Suitable for rotating or oscillating shafts in machinery, conveyors, and pumps under moderate loads and speeds
OILITE
This lubricated general purpose metallic sleeve bearing is made from SAE 841 bronze with a 3/4 in bore, 1 in OD, and 1 in length. It has a maximum PV rating of 50,000 lb/sq in-fpm and is sold in packs of 5. Suitable for rotating or oscillating shafts in machinery, conveyors, and pumps under moderate loads and speeds
This lubricated general purpose metallic sleeve bearing is made from SAE 841 oil-impregnated bronze. It has a 4 mm bore, 8 mm outer diameter, and 4 mm length, with a maximum PV rating of 49,938 lb/sq in-fpm. Suitable for light to moderate loads in rotating or oscillating applications, such as in automotive, appliance, and industrial machinery
OILITE
This lubricated general purpose metallic sleeve bearing is made from SAE 841 oil-impregnated bronze. It has a 4 mm bore, 8 mm outer diameter, and 4 mm length, with a maximum PV rating of 49,938 lb/sq in-fpm. Suitable for light to moderate loads in rotating or oscillating applications, such as in automotive, appliance, and industrial machinery
This OILITE sleeve bearing is a lubricated general purpose metallic bearing made from SAE 841 bronze. It has a 3 mm bore, 6 mm OD, and 4 mm length, with a maximum PV rating of 49,938 lb/sq in-fpm. Suitable for light to moderate loads in rotating or oscillating shafts, commonly used in small motors, gearboxes, pumps, and conveyors. Supplied in a pack of 10
OILITE
This OILITE sleeve bearing is a lubricated general purpose metallic bearing made from SAE 841 bronze. It has a 3 mm bore, 6 mm OD, and 4 mm length, with a maximum PV rating of 49,938 lb/sq in-fpm. Suitable for light to moderate loads in rotating or oscillating shafts, commonly used in small motors, gearboxes, pumps, and conveyors. Supplied in a pack of 10
This lubricated general purpose metallic sleeve bearing is made from SAE 841 bronze. It has a 3/8 in bore, 1/2 in OD, and 3/8 in length, with an operating temperature range of -35°F to 300°F. Suitable for low-speed, moderate-load rotary or oscillating motion applications such as industrial machinery, conveyors, and pumps. Sold in a pack of 10
OILITE
This lubricated general purpose metallic sleeve bearing is made from SAE 841 bronze. It has a 3/8 in bore, 1/2 in OD, and 3/8 in length, with an operating temperature range of -35°F to 300°F. Suitable for low-speed, moderate-load rotary or oscillating motion applications such as industrial machinery, conveyors, and pumps. Sold in a pack of 10
This lubricated general purpose metallic sleeve bearing is made from SAE 841 bronze. It has a 4 mm bore, 8 mm outer diameter, and 6 mm length, with a maximum PV rating of 49,938 lb/sq in-fpm. Suitable for light to moderate loads in machinery, conveyors, and automotive components requiring a self-lubricating bearing surface for metric shafts
OILITE
This lubricated general purpose metallic sleeve bearing is made from SAE 841 bronze. It has a 4 mm bore, 8 mm outer diameter, and 6 mm length, with a maximum PV rating of 49,938 lb/sq in-fpm. Suitable for light to moderate loads in machinery, conveyors, and automotive components requiring a self-lubricating bearing surface for metric shafts
This lubricated general purpose metallic sleeve bearing is made from SAE 841 bronze. It features a 3 mm bore, 6 mm outer diameter, and 1 mm length, with a maximum PV rating of 49,938 lb/sq in-fpm. Suitable for light-duty rotating or oscillating applications such as small motors, instruments, and office equipment. Supplied in a pack of 10
OILITE
This lubricated general purpose metallic sleeve bearing is made from SAE 841 bronze. It features a 3 mm bore, 6 mm outer diameter, and 1 mm length, with a maximum PV rating of 49,938 lb/sq in-fpm. Suitable for light-duty rotating or oscillating applications such as small motors, instruments, and office equipment. Supplied in a pack of 10

Lainnya dari SKF

Lihat semua SKF suku cadang →
Stainless steel wear sleeve for shaft diameters from 92.02 mm to 92.18 mm. Provides a protective surface to prevent shaft wear in rotating equipment such as pumps, gearboxes, and conveyors. Width on shaft is 12.7 mm, overall width is 15.88 mm
SKF
Stainless steel wear sleeve for shaft diameters from 92.02 mm to 92.18 mm. Provides a protective surface to prevent shaft wear in rotating equipment such as pumps, gearboxes, and conveyors. Width on shaft is 12.7 mm, overall width is 15.88 mm
Stainless steel wear sleeve for shaft diameters from 63.5 mm to 63.65 mm. Width on shaft is 19.84 mm, overall width is 23.83 mm. Used to protect shafts from wear in rotary sealing applications
SKF
Stainless steel wear sleeve for shaft diameters from 63.5 mm to 63.65 mm. Width on shaft is 19.84 mm, overall width is 23.83 mm. Used to protect shafts from wear in rotary sealing applications
This SKF wear sleeve is made of stainless steel and has an overall width of 19.05 mm with a width on shaft of 15.09 mm. It is used to protect shafts from wear in rotating equipment such as pumps, gearboxes, and conveyors, providing a replaceable running surface for seals
SKF
This SKF wear sleeve is made of stainless steel and has an overall width of 19.05 mm with a width on shaft of 15.09 mm. It is used to protect shafts from wear in rotating equipment such as pumps, gearboxes, and conveyors, providing a replaceable running surface for seals
This SKF wear sleeve is made of stainless steel and provides a protective surface for rotating shafts in industrial equipment such as pumps, gearboxes, and conveyors. It fits shaft diameters from 39.93 mm to 40.08 mm, with a width on shaft of 13 mm and an overall width of 16 mm
SKF
This SKF wear sleeve is made of stainless steel and provides a protective surface for rotating shafts in industrial equipment such as pumps, gearboxes, and conveyors. It fits shaft diameters from 39.93 mm to 40.08 mm, with a width on shaft of 13 mm and an overall width of 16 mm
Stainless steel wear sleeve for rotary shaft sealing applications. Provides a protective running surface to prevent shaft wear in pumps, gearboxes, and conveyors. Overall width 12.93 mm, width on shaft 9.91 mm
SKF
Stainless steel wear sleeve for rotary shaft sealing applications. Provides a protective running surface to prevent shaft wear in pumps, gearboxes, and conveyors. Overall width 12.93 mm, width on shaft 9.91 mm
Stainless steel wear sleeve for shaft diameters from 35.84 mm to 35.99 mm. Width on shaft is 13 mm, overall width 16.99 mm. Provides a protective surface against wear from seals and debris in rotating equipment
SKF
Stainless steel wear sleeve for shaft diameters from 35.84 mm to 35.99 mm. Width on shaft is 13 mm, overall width 16.99 mm. Provides a protective surface against wear from seals and debris in rotating equipment
SKF 99315 is a stainless steel wear sleeve designed to protect shafts from wear caused by seals and contaminants. It fits a shaft diameter range of 79.91 mm to 80.09 mm, with a width on shaft of 21.01 mm and an overall width of 24 mm. Commonly used in pumps, gearboxes, and conveyors to extend shaft life
SKF
SKF 99315 is a stainless steel wear sleeve designed to protect shafts from wear caused by seals and contaminants. It fits a shaft diameter range of 79.91 mm to 80.09 mm, with a width on shaft of 21.01 mm and an overall width of 24 mm. Commonly used in pumps, gearboxes, and conveyors to extend shaft life
Stainless steel wear sleeve for protecting shafts in rotating equipment such as pumps, gearboxes, and conveyors. Fits shaft diameters from 58.65 mm to 58.8 mm. Overall width 23.83 mm, width on shaft 19.84 mm
SKF
Stainless steel wear sleeve for protecting shafts in rotating equipment such as pumps, gearboxes, and conveyors. Fits shaft diameters from 58.65 mm to 58.8 mm. Overall width 23.83 mm, width on shaft 19.84 mm