Kami mengirim ke Indonesia — pintu ke pintu, bea cukai dan logistik ditangani oleh 3G Electric

3G Electric
Keranjang Permintaan PenawaranMinta PenawaranMasukDaftar
SKF Selongsong Aus: Untuk Rentang Diameter Poros 61,82 mm hingga 62 mm, Lebar pada Poros 19,84 mm - Wear Sleeves
SKFWear Sleeves

SKF Selongsong Aus: Untuk Rentang Diameter Poros 61,82 mm hingga 62 mm, Lebar pada Poros 19,84 mm

SKF Wear Sleeve adalah solusi perbaikan poros yang dirancang untuk memperpanjang umur pakai seal pada peralatan industri. Produk ini terbuat dari Stainless Steel dan cocok untuk rentang diameter poros 61.82 mm hingga…

SKU 3G-OTH-125798

Merek
SKF
Item
Selongsong Aus: Untuk Rentang Diameter Poros 61,82 mm hingga 62 mm, Lebar pada Poros 19,84 mm
Kategori
Wear Sleeves
Tersedia untuk Dipesan
Stok tersedia & bea cukai ditangani
  • 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
  • Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
  • Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Harga dagang sesuai penawaran — balasan dalam 24 jam
Jumlah
WhatsApp seorang insinyurMessage via Telegram
Tidak perlu akun — permintaan penawaran Anda langsung masuk ke tim insinyur kami. Akun gratis memungkinkan Anda melacak penawaran dan memesan ulang lebih cepat.
Pengiriman ke Seluruh Dunia
Pengiriman udara & laut
Lembar Data Atas Permintaan
Spesifikasi teknis
Penawaran 1 Hari
Balasan dalam 24 jam

Local availability & support — Indonesia

Phone
+65 8878 8355

Spesifikasi Teknis

SKF
Manufacturer Part Number
99243
Material
Stainless Steel
Overall Wd
23.83 mm
Wd On Shaft
19.84 mm

Dokumen Teknis

Tidak ada dokumen teknis yang tersedia untuk produk ini.
Minta dokumentasi →
Tidak yakin ini adalah suku cadang yang tepat? Minta rekomendasi.

Butuh bantuan pemasangan atau rekayasa?

Instalasi, komisioning, rencana pemeliharaan, desain sistem, dan penawaran produk + layanan bundel — satu tim menangani cakupan penuh.
Bicaralah dengan seorang insinyur

Ajukan pertanyaan

SKF Produk
3G Electric (S) Pte. Ltd. — Singapore

Deskripsi Produk

SKF Wear Sleeve adalah solusi perbaikan poros yang dirancang untuk memperpanjang umur pakai seal pada peralatan industri. Produk ini terbuat dari Stainless Steel dan cocok untuk rentang diameter poros 61.82 mm hingga 62 mm. Dengan lebar keseluruhan 23.83 mm dan lebar pada poros 19.84 mm, wear sleeve ini memberikan permukaan yang halus dan tahan aus untuk aplikasi ketel uap dan pembakar industri. SKU nomor 99243 memastikan identifikasi yang tepat untuk pengadaan suku cadang.

Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.

Pertanyaan yang Sering Diajukan

Apa fungsi SKF Wear Sleeve untuk poros 61.82 mm hingga 62 mm?

SKF Wear Sleeve berfungsi sebagai pelindung permukaan poros yang aus, sehingga seal dapat bekerja optimal tanpa kebocoran. Produk ini terbuat dari Stainless Steel dan dirancang untuk diameter poros 61.82 mm hingga 62 mm, dengan lebar keseluruhan 23.83 mm dan lebar pada poros 19.84 mm.

Apa spesifikasi SKF Wear Sleeve 99243?

Spesifikasi SKF Wear Sleeve 99243 meliputi material Stainless Steel, rentang diameter poros 61.82 mm hingga 62 mm, lebar keseluruhan 23.83 mm, dan lebar pada poros 19.84 mm. Produk ini cocok untuk aplikasi peralatan pembakaran dan ketel uap.

Di mana beli SKF Wear Sleeve 99243 di Indonesia?

Anda dapat membeli SKF Wear Sleeve 99243 melalui 3G Electric, distributor resmi yang memasok dan mengirimkan produk ini ke seluruh Indonesia. Kami menangani logistik dan bea cukai untuk memastikan pengiriman tepat waktu ke lokasi industri Anda.

Bagaimana cara memilih wear sleeve yang tepat untuk poros saya?

Pilih wear sleeve berdasarkan rentang diameter poros yang sesuai. SKF Wear Sleeve 99243 dirancang untuk poros dengan diameter 61.82 mm hingga 62 mm. Pastikan lebar keseluruhan 23.83 mm dan lebar pada poros 19.84 mm cocok dengan ruang pemasangan Anda.

Digunakan dalam

Aplikasi umum untuk SKF
Heavy machinery gearboxes — SKF spherical roller bearings (e.g., 24056 CCK30/W33) for high radial load capacity
Electric motor repair — SKF cylindrical roller bearings (e.g., NJ 307 ECP/C3) for free axial expansion
Pump shaft sealing — SKF CRWA1 rotary shaft seals (e.g., 17100) for fluid retention in rotating equipment
Conveyor system maintenance — SKF wear sleeves (e.g., 99274) to protect shafts from seal abrasion
Machine tool spindles — SKF angular contact bearings (e.g., 7413 BGBM) for axial load support in duplex sets
Industrial fan assemblies — SKF spherical roller bearings (e.g., 23044 CC/W33) for misalignment accommodation

SKF Produk

3G Electric memasok SKF wear sleeves. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.

Anda mungkin juga membutuhkan

Pembakar & Pembakaran →Pompa & Kompresor →Suku Cadang →Semua Produk →

Compatible alternatives & equivalents

Cross-referenced by specification & description
Stainless steel wear sleeve for protecting shafts in rotating equipment such as pumps, gearboxes, and compressors. Provides a replaceable sealing surface to extend shaft life and reduce maintenance downtime. Fits shaft diameter range of 61.85 mm to 62 mm
SKF
Stainless steel wear sleeve for protecting shafts in rotating equipment such as pumps, gearboxes, and compressors. Provides a replaceable sealing surface to extend shaft life and reduce maintenance downtime. Fits shaft diameter range of 61.85 mm to 62 mm
Stainless steel wear sleeve for protecting rotating shafts from wear and seal damage. Overall width 23.83 mm, width on shaft 19.84 mm. Used in pumps, gearboxes, and conveyors to extend shaft life
SKF
Stainless steel wear sleeve for protecting rotating shafts from wear and seal damage. Overall width 23.83 mm, width on shaft 19.84 mm. Used in pumps, gearboxes, and conveyors to extend shaft life
Stainless steel wear sleeve for protecting rotating shafts from wear caused by seals, debris, or corrosion. Fits shaft diameters from 76.12 mm to 76.28 mm. Provides a smooth, replaceable surface to extend shaft life in pumps, gearboxes, and conveyors
SKF
Stainless steel wear sleeve for protecting rotating shafts from wear caused by seals, debris, or corrosion. Fits shaft diameters from 76.12 mm to 76.28 mm. Provides a smooth, replaceable surface to extend shaft life in pumps, gearboxes, and conveyors
SKF wear sleeve made of stainless steel. Overall width 16.28 mm, width on shaft 12.7 mm. Provides a protective surface for shafts in rotating equipment such as pumps and gearboxes, reducing wear from seals and contaminants
SKF
SKF wear sleeve made of stainless steel. Overall width 16.28 mm, width on shaft 12.7 mm. Provides a protective surface for shafts in rotating equipment such as pumps and gearboxes, reducing wear from seals and contaminants
Stainless steel wear sleeve for shaft diameters from 44.37 mm to 44.53 mm. Width on shaft is 9.53 mm, overall width is 12.7 mm. Used in rotating equipment to protect shafts from wear and extend service life
SKF
Stainless steel wear sleeve for shaft diameters from 44.37 mm to 44.53 mm. Width on shaft is 9.53 mm, overall width is 12.7 mm. Used in rotating equipment to protect shafts from wear and extend service life
This SKF wear sleeve is made of stainless steel and designed to protect shafts from wear in rotating equipment such as pumps, gearboxes, and conveyors. It fits shaft diameters from 53.95 mm to 54.1 mm, with a width on shaft of 19.84 mm and an overall width of 23.83 mm
SKF
This SKF wear sleeve is made of stainless steel and designed to protect shafts from wear in rotating equipment such as pumps, gearboxes, and conveyors. It fits shaft diameters from 53.95 mm to 54.1 mm, with a width on shaft of 19.84 mm and an overall width of 23.83 mm

Lainnya dari SKF

Lihat semua SKF suku cadang →
Stainless steel wear sleeve for shaft diameters from 92.02 mm to 92.18 mm. Provides a protective surface to prevent shaft wear in rotating equipment such as pumps, gearboxes, and conveyors. Width on shaft is 12.7 mm, overall width is 15.88 mm
SKF
Stainless steel wear sleeve for shaft diameters from 92.02 mm to 92.18 mm. Provides a protective surface to prevent shaft wear in rotating equipment such as pumps, gearboxes, and conveyors. Width on shaft is 12.7 mm, overall width is 15.88 mm
Stainless steel wear sleeve for shaft diameters from 63.5 mm to 63.65 mm. Width on shaft is 19.84 mm, overall width is 23.83 mm. Used to protect shafts from wear in rotary sealing applications
SKF
Stainless steel wear sleeve for shaft diameters from 63.5 mm to 63.65 mm. Width on shaft is 19.84 mm, overall width is 23.83 mm. Used to protect shafts from wear in rotary sealing applications
This SKF wear sleeve is made of stainless steel and has an overall width of 19.05 mm with a width on shaft of 15.09 mm. It is used to protect shafts from wear in rotating equipment such as pumps, gearboxes, and conveyors, providing a replaceable running surface for seals
SKF
This SKF wear sleeve is made of stainless steel and has an overall width of 19.05 mm with a width on shaft of 15.09 mm. It is used to protect shafts from wear in rotating equipment such as pumps, gearboxes, and conveyors, providing a replaceable running surface for seals
This SKF wear sleeve is made of stainless steel and provides a protective surface for rotating shafts in industrial equipment such as pumps, gearboxes, and conveyors. It fits shaft diameters from 39.93 mm to 40.08 mm, with a width on shaft of 13 mm and an overall width of 16 mm
SKF
This SKF wear sleeve is made of stainless steel and provides a protective surface for rotating shafts in industrial equipment such as pumps, gearboxes, and conveyors. It fits shaft diameters from 39.93 mm to 40.08 mm, with a width on shaft of 13 mm and an overall width of 16 mm
Stainless steel wear sleeve for rotary shaft sealing applications. Provides a protective running surface to prevent shaft wear in pumps, gearboxes, and conveyors. Overall width 12.93 mm, width on shaft 9.91 mm
SKF
Stainless steel wear sleeve for rotary shaft sealing applications. Provides a protective running surface to prevent shaft wear in pumps, gearboxes, and conveyors. Overall width 12.93 mm, width on shaft 9.91 mm
Stainless steel wear sleeve for shaft diameters from 35.84 mm to 35.99 mm. Width on shaft is 13 mm, overall width 16.99 mm. Provides a protective surface against wear from seals and debris in rotating equipment
SKF
Stainless steel wear sleeve for shaft diameters from 35.84 mm to 35.99 mm. Width on shaft is 13 mm, overall width 16.99 mm. Provides a protective surface against wear from seals and debris in rotating equipment
SKF 99315 is a stainless steel wear sleeve designed to protect shafts from wear caused by seals and contaminants. It fits a shaft diameter range of 79.91 mm to 80.09 mm, with a width on shaft of 21.01 mm and an overall width of 24 mm. Commonly used in pumps, gearboxes, and conveyors to extend shaft life
SKF
SKF 99315 is a stainless steel wear sleeve designed to protect shafts from wear caused by seals and contaminants. It fits a shaft diameter range of 79.91 mm to 80.09 mm, with a width on shaft of 21.01 mm and an overall width of 24 mm. Commonly used in pumps, gearboxes, and conveyors to extend shaft life
Stainless steel wear sleeve for protecting shafts in rotating equipment such as pumps, gearboxes, and conveyors. Fits shaft diameters from 58.65 mm to 58.8 mm. Overall width 23.83 mm, width on shaft 19.84 mm
SKF
Stainless steel wear sleeve for protecting shafts in rotating equipment such as pumps, gearboxes, and conveyors. Fits shaft diameters from 58.65 mm to 58.8 mm. Overall width 23.83 mm, width on shaft 19.84 mm