SMC Arm Opening Angle Kit: Fits 50 mm Bore Dia
The SMC CKZN-D050C is an arm opening angle kit designed for 50 mm bore diameter cylinders. This autoswitch clip kit includes nine spring washers. It is manufactured by SMC under part number CKZN-D050C.
SKU 3G-OTH-145073
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The SMC CKZN-D050C is an arm opening angle kit designed for 50 mm bore diameter cylinders. This autoswitch clip kit includes nine spring washers. It is manufactured by SMC under part number CKZN-D050C.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is the SMC CKZN-D050C arm opening angle kit used for?
The SMC CKZN-D050C arm opening angle kit is used to adjust the opening angle of autoswitch clips on pneumatic cylinders with a 50 mm bore diameter. It includes nine spring washers to secure the setting. This kit is commonly applied in automated manufacturing and material handling systems where precise cylinder stroke control is needed.
What are the specifications of the SMC CKZN-D050C?
The SMC CKZN-D050C is an arm opening angle kit for 50 mm bore diameter cylinders. It includes nine spring washers (attr947354) and is manufactured by SMC under part number CKZN-D050C. The kit is classified as an autoswitch clip accessory, designed to mount and adjust the position of magnetic switches on SMC cylinder bodies.
Where to buy the SMC CKZN-D050C worldwide?
You can source the SMC CKZN-D050C arm opening angle kit through 3G Electric, a global industrial equipment distributor established in 1990. We handle full logistics, customs clearance, and delivery to worldwide destinations. Contact us for availability and lead time; we supply genuine SMC components for pneumatic automation systems.
How to install the SMC CKZN-D050C arm opening angle kit?
To install the SMC CKZN-D050C kit, first ensure the cylinder is depressurized. Slide the autoswitch clip onto the cylinder body at the desired position, then insert the nine spring washers into the clip slots to lock the angle. Tighten the clip screws evenly to secure the assembly. Always refer to the SMC installation manual for torque specifications.
Digunakan dalam
Aplikasi umum untuk SMCSMC Produk
3G Electric memasok SMC autoswitch clips. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
