SMITH-BLAIR Repair Clamp: For 1 1/2 in Pipe, 6 in Overall Lg
The SMITH-BLAIR Repair Clamp is a partial-gasket repair clamp for 1 1/2 in pipe, featuring a 6 in overall length and 304 stainless steel construction. It has a maximum operating pressure of 150 psi and a maximum…
SKU 3G-OTH-485196
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The SMITH-BLAIR Repair Clamp is a partial-gasket repair clamp for 1 1/2 in pipe, featuring a 6 in overall length and 304 stainless steel construction. It has a maximum operating pressure of 150 psi and a maximum vacuum pressure of 10 psi, with steel bolts and a nitrile rubber gasket.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is a SMITH-BLAIR repair clamp used for?
A SMITH-BLAIR repair clamp is used to seal leaks in 1 1/2 in pipe without replacing the entire section. It is a partial-gasket clamp with 304 stainless steel construction, rated for 150 psi operating pressure and 10 psi vacuum, ideal for water and low-pressure industrial piping.
What are the specifications of the SMITH-BLAIR 24500019006000 repair clamp?
The SMITH-BLAIR 24500019006000 repair clamp fits 1 1/2 in pipe, has a 6 in overall length, 304 stainless steel body, steel bolts, and a nitrile rubber gasket. Maximum operating pressure is 150 psi, maximum vacuum pressure is 10 psi. It is a partial-gasket design for tube and pipe repair.
Where to buy SMITH-BLAIR repair clamps worldwide?
3G Electric supplies SMITH-BLAIR repair clamps worldwide, handling full logistics and customs clearance. As a global industrial solutions provider, we source and deliver genuine SMITH-BLAIR parts like the 24500019006000 clamp to any location. Contact us for pricing and delivery to your region.
How to install a SMITH-BLAIR partial-gasket repair clamp?
To install a SMITH-BLAIR partial-gasket repair clamp, clean the pipe surface, position the clamp over the leak with the nitrile rubber gasket centered, then tighten the steel bolts evenly to the manufacturer's torque specification. Do not exceed 150 psi operating pressure. Always depressurize the line before installation.
SMITH-BLAIR Produk
3G Electric memasok SMITH-BLAIR partial-gasket repair clamps for tube & pipe. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
