SMITH-BLAIR Pipe Repair Clamps: For 1 in Pipe, 3 in Overall Lg
The SMITH-BLAIR Full-Gasket Repair Clamp for 1 in pipe (SKU 801WP5) is a 3 in overall length clamp made of 304 stainless steel with steel bolts and a nitrile rubber gasket. It is rated for a maximum operating…
SKU 3G-OTH-469067
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The SMITH-BLAIR Full-Gasket Repair Clamp for 1 in pipe (SKU 801WP5) is a 3 in overall length clamp made of 304 stainless steel with steel bolts and a nitrile rubber gasket. It is rated for a maximum operating pressure of 150 psi and a maximum vacuum pressure of 10 psi.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is a SMITH-BLAIR pipe repair clamp used for?
A SMITH-BLAIR full-gasket repair clamp is used to seal leaks in 1 in pipe quickly without replacing the pipe section. It is common in water, gas, and industrial piping systems where a durable, temporary or permanent repair is needed under pressures up to 150 psi.
What are the specifications of the SMITH-BLAIR 24400013203000 repair clamp?
This SMITH-BLAIR clamp fits 1 in pipe, has a 3 in overall length, and is made of 304 stainless steel with steel bolts. The gasket is nitrile rubber. Maximum operating pressure is 150 psi; maximum vacuum pressure is 10 psi. The manufacturer part number is 24400013203000.
Where to buy SMITH-BLAIR pipe repair clamps worldwide?
3G Electric supplies SMITH-BLAIR pipe repair clamps worldwide. As a global industrial sourcing partner, we handle logistics, customs clearance, and delivery to your site. Contact us for pricing and lead time on the 24400013203000 or other SMITH-BLAIR repair clamps.
How to install a SMITH-BLAIR full-gasket repair clamp?
Clean the pipe surface around the leak. Place the clamp over the pipe with the gasket centered on the leak. Tighten the steel bolts evenly in a crisscross pattern to the manufacturer's torque specification. Do not overtighten. Test the repair by gradually pressurizing the line to the rated 150 psi.
SMITH-BLAIR Produk
3G Electric memasok SMITH-BLAIR full-gasket repair clamps for tube & pipe. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
