SQUARE D Manual Motor Switch: 3 Poles, 20 A, 0.75 in Hub Dia
The SQUARE D 2510KR2 is an enclosed hazardous-location manual motor switch with 3 poles and a 20 A rating. It features a 0.75 in hub diameter and a dead-end configuration. This unit is not factory sealed.
SKU 3G-OTH-41565
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The SQUARE D 2510KR2 is an enclosed hazardous-location manual motor switch with 3 poles and a 20 A rating. It features a 0.75 in hub diameter and a dead-end configuration. This unit is not factory sealed.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is the SQUARE D 2510KR2 manual motor switch used for?
The SQUARE D 2510KR2 is an enclosed hazardous-location manual motor switch used to safely disconnect and control motors in environments with flammable gases or dust. It is suitable for industrial plants, refineries, and chemical facilities where explosion-proof equipment is required.
What are the specifications of the SQUARE D 2510KR2?
The SQUARE D 2510KR2 is a 3-pole manual motor switch rated at 20 A. It has a 0.75 in hub diameter and a dead-end configuration. This unit is not factory sealed. The manufacturer part number is 2510KR2, and it is designed for enclosed hazardous-location use.
Where to buy the SQUARE D 2510KR2 worldwide?
You can source the SQUARE D 2510KR2 through 3G Electric, a global industrial equipment distributor. We handle full logistics, customs clearance, and delivery to worldwide destinations. Contact us for availability and lead time on this enclosed hazardous-location manual motor switch.
How to install the SQUARE D 2510KR2 manual motor switch?
Installation must follow the National Electrical Code (NEC) for hazardous locations. Ensure the enclosure is properly sealed and grounded. The dead-end hub requires a conduit fitting. Always disconnect power before wiring. Refer to the SQUARE D manual for torque and wiring details.
Digunakan dalam
Aplikasi umum untuk SQUARE DSQUARE D Produk
3G Electric memasok SQUARE D enclosed hazardous-location manual motor switches. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
