ST GOBAIN Film Tape: 3/4 in Wd, 36 yd Lg, 3.5 mil Thick, Rubber, Polytetrafluoroethylene Film
The ST GOBAIN Film Tape (MPN 2250-2, Series 2250-2) is a 3/4 in wide, 36 yd long PTFE Slick Surface Tape with a thickness of 3.5 mil, constructed from rubber and polytetrafluoroethylene film in gray. 3G Electric…
SKU 3G-OTH-563920
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The ST GOBAIN Film Tape (MPN 2250-2, Series 2250-2) is a 3/4 in wide, 36 yd long PTFE Slick Surface Tape with a thickness of 3.5 mil, constructed from rubber and polytetrafluoroethylene film in gray. 3G Electric interprets demand for this tape across 14 industrial departments, with specialist depth in combustion, pumps and controls as an authorised distributor, ensuring the right solution is sourced and supported.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is ST GOBAIN Film Tape 2250-2 used for?
ST GOBAIN Film Tape 2250-2 is a PTFE slick surface tape used for low-friction surfaces, release liners, and sealing in industrial applications. It is commonly applied in packaging, material handling, and heat-sealing equipment where non-stick properties are required.
What are the specifications of ST GOBAIN Film Tape 2250-2?
The ST GOBAIN Film Tape 2250-2 is 3/4 in wide, 36 yd long, and 3.5 mil thick. It is made from rubber and polytetrafluoroethylene film in gray. The series is 2250-2, and the manufacturer part number is 2250-2.
Where to buy ST GOBAIN Film Tape 2250-2 worldwide?
3G Electric supplies ST GOBAIN Film Tape 2250-2 worldwide. We handle full logistics, customs clearance, and delivery to your site. As a global industrial solutions provider, we source this tape across 14 departments, ensuring you get the right PTFE tape for your application.
How to install ST GOBAIN Film Tape 2250-2?
To install ST GOBAIN Film Tape 2250-2, clean the surface thoroughly to remove grease and dust. Apply the tape with firm pressure, avoiding air bubbles. For best adhesion, use at temperatures above 50 °F. Trim excess with a sharp blade. No special tools are required.
ST GOBAIN Produk
3G Electric memasok ST GOBAIN ptfe slick surface tape. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
