STANDARD LOCKNUT Bearing Lock Washer: TW108, Inch, Steel, 0.062 in Washer Thick, NHE
The STANDARD LOCKNUT Bearing Lock Washer TW108 is a steel lock washer designed for use with NHE lock nuts and taper roller bearings. It has a washer thickness of 0.062 inches and a face diameter of 2 inches. This…
SKU 3G-OTH-97224
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The STANDARD LOCKNUT Bearing Lock Washer TW108 is a steel lock washer designed for use with NHE lock nuts and taper roller bearings. It has a washer thickness of 0.062 inches and a face diameter of 2 inches. This inch-series component is manufactured by STANDARD LOCKNUT under part number TW108.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Frequently Asked Questions
What is the STANDARD LOCKNUT TW108 bearing lock washer used for?
The STANDARD LOCKNUT TW108 bearing lock washer secures NHE lock nuts on taper roller bearing assemblies. It prevents loosening under vibration in industrial machinery, conveyor systems, and heavy equipment. This inch-series steel washer is a critical component for maintaining bearing preload and shaft retention.
What are the specifications of the STANDARD LOCKNUT TW108?
The STANDARD LOCKNUT TW108 is a steel bearing lock washer with a thickness of 0.062 inches and a face diameter of 2 inches. It is compatible with NHE lock nuts and taper roller bearings. The manufacturer part number is TW108, and it is an inch-series component from STANDARD LOCKNUT.
Where to buy the STANDARD LOCKNUT TW108 worldwide?
3G Electric supplies the STANDARD LOCKNUT TW108 bearing lock washer worldwide. As a global industrial distributor since 1990, we handle full logistics, customs clearance, and delivery to your site. Contact us for availability and lead time; we source and deliver this component to any international destination.
How to select the correct STANDARD LOCKNUT bearing lock washer?
To select the correct STANDARD LOCKNUT bearing lock washer, match the washer to the compatible lock nut series (e.g., NHE) and bearing type (taper roller). Verify the shaft diameter and face diameter—here 2 inches—and ensure the washer thickness (0.062 inches) fits the assembly. Always confirm the manufacturer part number TW108 for exact fit.
Digunakan dalam
Aplikasi umum untuk STANDARD LOCKNUTSTANDARD LOCKNUT Produk
3G Electric memasok STANDARD LOCKNUT bearing lock washers. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
