STANDARD LOCKNUT Bearing Lock Washer: TW117, Inch, Steel, 0.085 in Washer Thick, NHE
The STANDARD LOCKNUT Bearing Lock Washer, model TW117, is a steel lock washer designed for use with NHE lock nuts and taper roller bearings. It features 19 tabs and a washer thickness of 0.085 inches, providing a…
SKU 3G-OTH-97432
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The STANDARD LOCKNUT Bearing Lock Washer, model TW117, is a steel lock washer designed for use with NHE lock nuts and taper roller bearings. It features 19 tabs and a washer thickness of 0.085 inches, providing a secure locking solution for inch-series bearing assemblies.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is the STANDARD LOCKNUT TW117 bearing lock washer used for?
The STANDARD LOCKNUT TW117 bearing lock washer secures NHE lock nuts on taper roller bearing assemblies in inch-series industrial equipment. Its 19 tabs lock into nut slots to prevent loosening under vibration, making it essential for conveyors, gearboxes, and heavy machinery where bearing retention is critical.
What are the specifications of the STANDARD LOCKNUT TW117 bearing lock washer?
The STANDARD LOCKNUT TW117 is a steel bearing lock washer with 19 tabs, a washer thickness of 0.085 inches, and compatibility with NHE lock nuts and taper roller bearings. It is designed for inch-series applications and manufactured by STANDARD LOCKNUT under part number TW117.
Where to buy the STANDARD LOCKNUT TW117 bearing lock washer worldwide?
3G Electric supplies the STANDARD LOCKNUT TW117 bearing lock washer worldwide. As a global industrial distributor since 1990, we handle full logistics, customs clearance, and delivery to your site. Contact us for availability and lead time; we source and deliver this part to any international destination.
How to install the STANDARD LOCKNUT TW117 bearing lock washer?
To install the STANDARD LOCKNUT TW117, place the washer over the shaft against the bearing inner ring. Align its 19 tabs with the slots on the NHE lock nut, then tighten the nut to the specified torque. Bend one tab into a nut slot to lock the assembly. Always follow the bearing manufacturer's torque and alignment guidelines.
Digunakan dalam
Aplikasi umum untuk STANDARD LOCKNUTSTANDARD LOCKNUT Produk
3G Electric memasok STANDARD LOCKNUT bearing lock washers. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
