Kami mengirim ke Indonesia — pintu ke pintu, bea cukai dan logistik ditangani oleh 3G Electric

3G Electric
Keranjang Permintaan PenawaranMinta PenawaranMasukDaftar
STARRETT Pelubang Pusat Otomatis: Ukuran Ujung 5/8 in, Bulat, Diameter Tangkai 1/4 in, Panjang Keseluruhan 5 in - Centering Punches
STARRETTCentering Punches

STARRETT Pelubang Pusat Otomatis: Ukuran Ujung 5/8 in, Bulat, Diameter Tangkai 1/4 in, Panjang Keseluruhan 5 in

STARRETT Automatic Center Punch dengan ukuran ujung 5/8 in adalah alat centering punch tipe Round yang dirancang untuk penandaan presisi pada permukaan logam. Dengan diameter betis 1/4 in dan panjang keseluruhan 5…

SKU 3G-OTH-632617

Merek
STARRETT
Item
Pelubang Pusat Otomatis: Ukuran Ujung 5/8 in, Bulat, Diameter Tangkai 1/4 in, Panjang Keseluruhan 5 in
Kategori
Centering Punches
Tersedia untuk Dipesan
Stok tersedia & bea cukai ditangani
  • 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
  • Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
  • Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Harga dagang sesuai penawaran — balasan dalam 24 jam
Jumlah
WhatsApp seorang insinyurMessage via Telegram
Tidak perlu akun — permintaan penawaran Anda langsung masuk ke tim insinyur kami. Akun gratis memungkinkan Anda melacak penawaran dan memesan ulang lebih cepat.
Pengiriman ke Seluruh Dunia
Pengiriman udara & laut
Lembar Data Atas Permintaan
Spesifikasi teknis
Penawaran 1 Hari
Balasan dalam 24 jam

Local availability & support — Indonesia

Phone
+65 8878 8355

Spesifikasi Teknis

STARRETT
Manufacturer Part Number
818
Type
Round
Overall Lg
5 in
Taper Lg
5/8 in
Shank Dia
1/4 in

Dokumen Teknis

Tidak ada dokumen teknis yang tersedia untuk produk ini.
Minta dokumentasi →
Tidak yakin ini adalah suku cadang yang tepat? Minta rekomendasi.

Butuh bantuan pemasangan atau rekayasa?

Instalasi, komisioning, rencana pemeliharaan, desain sistem, dan penawaran produk + layanan bundel — satu tim menangani cakupan penuh.
Bicaralah dengan seorang insinyur

Ajukan pertanyaan

STARRETT Produk
3G Electric (S) Pte. Ltd. — Singapore

Deskripsi Produk

STARRETT Automatic Center Punch dengan ukuran ujung 5/8 in adalah alat centering punch tipe Round yang dirancang untuk penandaan presisi pada permukaan logam. Dengan diameter betis 1/4 in dan panjang keseluruhan 5 in, punch ini memudahkan pembuatan titik awal pengeboran yang akurat tanpa perlu palu. Cocok untuk aplikasi fabrikasi dan permesinan di bengkel industri.

Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.

Pertanyaan yang Sering Diajukan

Untuk apa STARRETT Automatic Center Punch digunakan?

STARRETT Automatic Center Punch digunakan untuk membuat titik penanda awal pada permukaan logam sebelum pengeboran. Dengan tipe Round dan ukuran ujung 5/8 in, alat ini bekerja secara otomatis tanpa palu, memastikan akurasi tinggi pada pekerjaan fabrikasi dan permesinan.

Apa spesifikasi STARRETT Automatic Center Punch 818?

Spesifikasi STARRETT Automatic Center Punch model 818 meliputi tipe Round, ukuran ujung 5/8 in, diameter betis 1/4 in, dan panjang keseluruhan 5 in. Produk ini tidak dilengkapi aksesori tambahan (None).

Di mana beli STARRETT Automatic Center Punch di Indonesia?

Anda dapat membeli STARRETT Automatic Center Punch di Indonesia melalui 3G Electric, distributor resmi yang memasok dan mengirimkan peralatan industri ke seluruh Indonesia. Kami menangani logistik dan bea cukai untuk memastikan produk sampai ke lokasi Anda.

Bagaimana cara memilih Automatic Center Punch yang tepat?

Pilih Automatic Center Punch berdasarkan ukuran ujung dan diameter betis yang sesuai dengan kebutuhan penandaan Anda. STARRETT model 818 dengan ukuran ujung 5/8 in dan betis 1/4 in cocok untuk penandaan presisi pada logam. Pastikan tipe Round sesuai dengan aplikasi Anda.

Digunakan dalam

Aplikasi umum untuk STARRETT
Structural steel fabrication — TENNAX™-PRO bi-metal band saw blades for cutting beams and channels
Stainless steel pipe cutting — Advanz™ CS carbide-tipped band saw blades for abrasive material
Aluminum extrusion cutting — Duratec™ SFB carbon steel band saw blades for soft metals
General metalworking maintenance — Intenss™ PRO-DIE high-speed steel band saw blades for mixed metals
Hard alloy tool steel cutting — Intenss™ PRO bi-metal band saw blades with hook edge
Wood and non-ferrous material sawing — Duratec™ SFB carbon steel blades for multi-material shops
Not sure this is the right part? Photo-identify it→

STARRETT Produk

3G Electric memasok STARRETT centering punches. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.

Anda mungkin juga membutuhkan

Pembakar & Pembakaran →Pompa & Kompresor →Suku Cadang →Semua Produk →

Compatible alternatives & equivalents

Cross-referenced by specification & description
This centering punch features a square body with a knurled grip for secure handling. It has a 1-1/2 in taper length and an overall length of 4-1/4 in. Used to create a starting dimple on metal surfaces prior to drilling, preventing drill bit wander in layout and fabrication work
STARRETT
This centering punch features a square body with a knurled grip for secure handling. It has a 1-1/2 in taper length and an overall length of 4-1/4 in. Used to create a starting dimple on metal surfaces prior to drilling, preventing drill bit wander in layout and fabrication work
This set includes four brass flat-tip punches with tip diameters of 3/16 in, 1/4 in, 5/16 in, and 3/8 in, and a 3 1/2 in punch taper length. The non-sparking brass construction makes it suitable for use in environments where sparking must be avoided, such as during maintenance of SAE fasteners
STARRETT
This set includes four brass flat-tip punches with tip diameters of 3/16 in, 1/4 in, 5/16 in, and 3/8 in, and a 3 1/2 in punch taper length. The non-sparking brass construction makes it suitable for use in environments where sparking must be avoided, such as during maintenance of SAE fasteners
Round steel drive pin punch with a flat tip, 5/16 in tip diameter, and 8 in overall length. Designed for SAE applications to remove drive pins and dowel pins in assembly and maintenance tasks
STARRETT
Round steel drive pin punch with a flat tip, 5/16 in tip diameter, and 8 in overall length. Designed for SAE applications to remove drive pins and dowel pins in assembly and maintenance tasks
This center head is a component for machinist combination squares, used to locate the center of round or cylindrical workpieces such as shafts, rods, and pipes. It is made of steel with a smooth finish and is compatible with an 18-inch blade length. Commonly employed in metalworking, machining, and fabrication for layout and inspection tasks
STARRETT
This center head is a component for machinist combination squares, used to locate the center of round or cylindrical workpieces such as shafts, rods, and pipes. It is made of steel with a smooth finish and is compatible with an 18-inch blade length. Commonly employed in metalworking, machining, and fabrication for layout and inspection tasks
This center head is a machinist combination square head made of cast iron steel with a wrinkle finish. It is designed for use with a 6-inch blade to locate the center of round or cylindrical workpieces in layout and machining tasks
STARRETT
This center head is a machinist combination square head made of cast iron steel with a wrinkle finish. It is designed for use with a 6-inch blade to locate the center of round or cylindrical workpieces in layout and machining tasks
This cabled digital caliper is designed for centerline and hole-to-hole measurement. It features conical points and disc contacts for outside measurement of hole centers and spacing on large parts. Range: 0-24 in / 0-600 mm, accuracy: +/-0.002 in, resolution: 0.0005 in / 0.01 mm
STARRETT
This cabled digital caliper is designed for centerline and hole-to-hole measurement. It features conical points and disc contacts for outside measurement of hole centers and spacing on large parts. Range: 0-24 in / 0-600 mm, accuracy: +/-0.002 in, resolution: 0.0005 in / 0.01 mm

Lainnya dari STARRETT

Lihat semua STARRETT suku cadang →
This center punch features a 1/4 in tip size and a square, knurled grip for secure handling. With a 5 in overall length and 1 3/4 in taper length, it is used to create precise starting dimples on metal surfaces for drilling or layout work in machining, fabrication, and maintenance applications
STARRETT
This center punch features a 1/4 in tip size and a square, knurled grip for secure handling. With a 5 in overall length and 1 3/4 in taper length, it is used to create precise starting dimples on metal surfaces for drilling or layout work in machining, fabrication, and maintenance applications
Round, box-type centering punch with 1 3/4 in taper length and 7/16 in shank diameter. Overall length 5 in. Used for marking dimples on metal surfaces to guide drill bits in layout and fabrication tasks
STARRETT
Round, box-type centering punch with 1 3/4 in taper length and 7/16 in shank diameter. Overall length 5 in. Used for marking dimples on metal surfaces to guide drill bits in layout and fabrication tasks
This centering punch features a 1/16 in tip size, square knurled grip, and 23/64 in box body. With 3 in overall length and 1 in taper length, it is used for marking metal surfaces to guide drill bits and prevent wandering in machining and fabrication applications
STARRETT
This centering punch features a 1/16 in tip size, square knurled grip, and 23/64 in box body. With 3 in overall length and 1 in taper length, it is used for marking metal surfaces to guide drill bits and prevent wandering in machining and fabrication applications
Round box-type centering punch with 1 1/2 in taper length and 5/16 in shank diameter. Overall length 4 in. Used to mark precise dimples on metal or plastic surfaces for accurate drill bit starting points
STARRETT
Round box-type centering punch with 1 1/2 in taper length and 5/16 in shank diameter. Overall length 4 in. Used to mark precise dimples on metal or plastic surfaces for accurate drill bit starting points
Round center punch with knurled grip for precise dimple marking on metal or plastic surfaces. Overall length 3 in, taper length 1 7/8 in. Supplied in a box. Used to guide drill bits and prevent wandering during drilling operations
STARRETT
Round center punch with knurled grip for precise dimple marking on metal or plastic surfaces. Overall length 3 in, taper length 1 7/8 in. Supplied in a box. Used to guide drill bits and prevent wandering during drilling operations
This centering punch features a round, knurled grip for secure handling. It creates a precise dimple on metal surfaces to guide drill bits, preventing wandering. Commonly used in machining, fabrication, and maintenance for layout and drilling operations
STARRETT
This centering punch features a round, knurled grip for secure handling. It creates a precise dimple on metal surfaces to guide drill bits, preventing wandering. Commonly used in machining, fabrication, and maintenance for layout and drilling operations
Center punch with 3/32 in tip for marking precise starting points on metal, wood, or plastic. Features a square knurled grip and 1 1/4 in taper length. Overall length 3 3/4 in. Supplied in a box
STARRETT
Center punch with 3/32 in tip for marking precise starting points on metal, wood, or plastic. Features a square knurled grip and 1 1/4 in taper length. Overall length 3 3/4 in. Supplied in a box
Round, box-type centering punch with a 1 1/2 in taper length and 5/16 in shank diameter. Overall length of 4 in. Used to create a starting dimple on metal surfaces for accurate drill bit guidance in machining and fabrication tasks
STARRETT
Round, box-type centering punch with a 1 1/2 in taper length and 5/16 in shank diameter. Overall length of 4 in. Used to create a starting dimple on metal surfaces for accurate drill bit guidance in machining and fabrication tasks