SUGATSUNE Pull Handle: Unthreaded Holes, Stainless Steel, Silver
The SUGATSUNE FT-80 Pull Handle is a fixed, non-recessed stainless steel handle with a mirror finish and unthreaded mounting holes. It features a 0.315 in grip thickness and uses 3.1 mm x 16 mm screws. 3G Electric…
SKU 3G-OTH-514807
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The SUGATSUNE FT-80 Pull Handle is a fixed, non-recessed stainless steel handle with a mirror finish and unthreaded mounting holes. It features a 0.315 in grip thickness and uses 3.1 mm x 16 mm screws. 3G Electric interprets demand for this standard pull handle across 14 industrial departments, with specialist depth in combustion, pumps and controls as an authorised distributor.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is the SUGATSUNE FT-80 pull handle used for?
The SUGATSUNE FT-80 is a fixed, non-recessed stainless steel pull handle with a mirror finish, used on industrial cabinets, enclosures, and machinery doors. 3G Electric supplies this handle across 14 industrial departments, with specialist depth in combustion, pumps and controls.
What are the specifications of the SUGATSUNE FT-80 pull handle?
The SUGATSUNE FT-80 is a stainless steel handle in silver with a mirror finish. It has unthreaded mounting holes, a 0.315 in grip thickness, and uses 3.1 mm x 16 mm screws. The projection type is non-recessed and the folding type is fixed.
Where to buy the SUGATSUNE FT-80 pull handle worldwide?
3G Electric supplies the SUGATSUNE FT-80 pull handle worldwide. As a global industrial solutions provider, we handle full logistics, customs clearance, and delivery to your location. Contact us to order this standard pull handle for your application.
How to install the SUGATSUNE FT-80 pull handle?
Install the SUGATSUNE FT-80 by aligning the unthreaded holes with pre-drilled mounting points on the panel. Insert the 3.1 mm x 16 mm screws through the handle and into the panel, then tighten securely. Ensure the handle sits flush against the surface for a clean finish.
Digunakan dalam
Aplikasi umum untuk SUGATSUNESUGATSUNE Produk
3G Electric memasok SUGATSUNE standard pull handles. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
