Suntec TV VALVE

[{"filename":"TV_EN_Ed11_January-2025.pdf","text":"PUMP TYPE TV TV\n TV - 11 - Ed 11 - January 2025\nThis is a general specification leaflet ; for specific applications\n VALVE\nnot covered herein, contact Suntec.\n IDENTIFICATION\n (Not all model combinations are available\nThe SUNTEC TV valve is a pressure regulating valve. Consult your Suntec representative)\n\nAPPLICATIONS\n- Heavy oil, light oil, B100.\n TV : Pressure regulating valve\n- Capacity up to 5000 l/h.\n- May be used with the SUNTEC T pump.\n\nVALVE OPERATING PRINCIPLE Pressure range :\n 10 : 2 - 10 bars\nThe pressure of the nozzle line is adjusted with the adjusting screw of the TV valve.\n 40 : 7 - 40 bars\nThe oil in excess to nozzle requirement is dumped to the return.\n\n\n\n\n TV 40 01 1\n Oil under pressure\n\n\n By-passed oil Intake Return\n Regulation type :\n 01 : by screw\n\n\n Pressure\n adjustment\n\n\n Revision number\n Nozzle and intake are\n reversible\n To nozzle\n\n\n\n\n INSTALLATION\n Two pipe system : oil in excess is returned to tank.\n One pipe system : oil in excess is returned to pump suction.\n\n\n\n Oil under suction\n\n Oil under pressure\n\n By-passed oil\n returned to tank, or\n to suction\n\n To tank\n\n\n\n Return\n Return to\n suction\n\n\n\n To nozzle Intake\n from Tank\n\n\n\n\n TV\n valve T pump\n\n\n\n SUNTEC INDUSTRIES FRANCE - 1, rue Lavoisier - CS 60 102 - F-21603 LONGVIC Cedex - www.suntec.fr\n\n 85\n\fTECHNICAL DATA Hydraulic data\n\nGeneral Pressure ranges 10 : 2 - 10 bars\n (delivery pressure setting : 7 bars)\nConnection threads Cylindrical according to ISO 228/1 40 : 7 - 40 bars\n (delivery pressure setting : 20 bars)\nInlet G 3/4\n Operating viscosity 3 - 75 mm²/s (cSt)\nNozzle outlet G 3/4\n (Higher viscosity oil can be used\nReturn G 3/4 by heating the oil\nWeight 3 kg to lower its viscosity under 75 cSt.\n For kerosene applications,contact\n SUNTEC)\n Oil temperature 0 - 150°C max. in the valve.\n\n\n\n\n MOUNTING POSITION\n TV valve may be mounted in any position.\n  \n\n PRESSURE ADJUSTMENT\n Remove cap-nut  and washer , unscrew lock-nut .\n   \n To increase pressure, turn adjusting screw  clockwise.\n To decrease the pressure, turn screw anticlockwise.\n Block lock-nut , refasten washer  and cap-nut .\n  Cap-nut  Adjusting  Lock nut\n screw\n  Washer  Washer\n\n\n\n\n DIMENSIONS (in mm)\n\n\n 197\n\n 167\n\n 45 43\n 60  \n\n\n 75 52\n\n\n\n\n \n 45\n\n\n  Intake or nozzle outlet  Nozzle outlet or intake  Return\n\nWe reserve the right to change specifications without prior notice. TV - 11 - Ed 11 - Jan 2025"}]