TAPCON Concrete Anchor Screw: 4 in Overall Lg, 1/4 in Dia, Steel, Torx, Flat, Steel
The TAPCON Concrete Anchor Screw is a flat-head screw anchor with a 4-inch overall length and 1/4-inch diameter, made of steel with a Torx drive and supplied in a 100-pack. This inch-system, not-graded concrete screw…
SKU 3G-OTH-540825
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The TAPCON Concrete Anchor Screw is a flat-head screw anchor with a 4-inch overall length and 1/4-inch diameter, made of steel with a Torx drive and supplied in a 100-pack. This inch-system, not-graded concrete screw anchor (MPN 3195407V2) is designed for reliable fastening into concrete substrates.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is the TAPCON Concrete Anchor Screw used for?
The TAPCON Concrete Anchor Screw is used for fastening fixtures, brackets, and equipment directly into concrete, block, or brick substrates. Its flat-head design and Torx drive allow flush mounting and secure torque transfer, making it suitable for industrial, construction, and maintenance applications.
What are the specifications of the TAPCON Concrete Anchor Screw 3195407V2?
This TAPCON concrete screw anchor has a 1/4 in diameter and 4 in overall length, made of steel with a Torx drive and flat head. It is an inch-system, not-graded fastener supplied in a 100-pack. The manufacturer part number is 3195407V2.
Where to buy TAPCON Concrete Anchor Screws worldwide?
3G Electric supplies TAPCON Concrete Anchor Screws worldwide, handling full logistics, customs clearance, and delivery to your site. As a global industrial solutions provider, we source and deliver genuine TAPCON fasteners like the 3195407V2 to support your concrete anchoring needs across any region.
How to install a TAPCON Concrete Anchor Screw?
Drill a pilot hole into concrete using a carbide bit matching the anchor diameter, then clean the hole of dust. Insert the TAPCON screw and drive it with a Torx bit until the flat head is flush. Avoid over-torquing to prevent thread stripping. Always follow standard concrete anchoring best practices.
Digunakan dalam
Aplikasi umum untuk TAPCONTAPCON Produk
3G Electric memasok TAPCON flat-head screw anchors. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
