Kami mengirim ke Indonesia — pintu ke pintu, bea cukai dan logistik ditangani oleh 3G Electric

3G Electric
Keranjang Permintaan PenawaranMinta PenawaranMasukDaftar
TECHSPRAY No-Clean Flux Desoldering Braid #2 0.055 in 10 ft Yellow ESD-Safe - No-Clean Flux Desoldering Braids
TECHSPRAYNo-Clean Flux Desoldering Braids

TECHSPRAY No-Clean Flux Desoldering Braid #2 0.055 in 10 ft Yellow ESD-Safe

TECHSPRAY Desoldering Braid dengan No-Clean Flux adalah solusi andal untuk pekerjaan desoldering di peralatan elektronik industri. Produk ini memiliki tipe #2 dengan lebar 0,055 inci dan panjang 10 kaki, berwarna…

SKU 3G-OTH-358754

Juga terdaftar sebagai: 182110F · 1821 10F

Merek
TECHSPRAY
Item
No-Clean Flux Desoldering Braid #2 0.055 in 10 ft Yellow ESD-Safe
Kategori
No-Clean Flux Desoldering Braids
Tersedia untuk Dipesan
Stok tersedia & bea cukai ditangani
  • 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
  • Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
  • Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Harga dagang sesuai penawaran — balasan dalam 24 jam
Jumlah
WhatsApp seorang insinyurMessage via Telegram
Tidak perlu akun — permintaan penawaran Anda langsung masuk ke tim insinyur kami. Akun gratis memungkinkan Anda melacak penawaran dan memesan ulang lebih cepat.
Pengiriman ke Seluruh Dunia
Pengiriman udara & laut
Lembar Data Atas Permintaan
Spesifikasi teknis
Penawaran 1 Hari
Balasan dalam 24 jam

Local availability & support — Indonesia

Phone
+65 8878 8355

Spesifikasi Teknis

TECHSPRAY
Manufacturer Part Number
1821-10F
Type
# 2, 0.055 in, 10 ft, Yellow, ESD-Safe
Color
Yellow

Dokumen Teknis

Tidak ada dokumen teknis yang tersedia untuk produk ini.
Minta dokumentasi →
Tidak yakin ini adalah suku cadang yang tepat? Minta rekomendasi.

Butuh bantuan pemasangan atau rekayasa?

Instalasi, komisioning, rencana pemeliharaan, desain sistem, dan penawaran produk + layanan bundel — satu tim menangani cakupan penuh.
Bicaralah dengan seorang insinyur

Ajukan pertanyaan

TECHSPRAY Produk
3G Electric (S) Pte. Ltd. — Singapore

Deskripsi Produk

TECHSPRAY Desoldering Braid dengan No-Clean Flux adalah solusi andal untuk pekerjaan desoldering di peralatan elektronik industri. Produk ini memiliki tipe #2 dengan lebar 0,055 inci dan panjang 10 kaki, berwarna kuning, serta dirancang ESD-Safe untuk melindungi komponen sensitif. Dengan flux no-clean, Anda tidak perlu membersihkan residu setelah penggunaan, menghemat waktu dan tenaga dalam perawatan peralatan industri.

Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.

Pertanyaan yang Sering Diajukan

Apa spesifikasi TECHSPRAY Desoldering Braid 1821-10F?

TECHSPRAY Desoldering Braid 1821-10F memiliki tipe #2 dengan lebar 0,055 inci dan panjang 10 kaki. Warna kuning dengan flux no-clean, serta fitur ESD-Safe untuk melindungi komponen elektronik dari kerusakan statis.

Untuk apa TECHSPRAY Desoldering Braid digunakan?

TECHSPRAY Desoldering Braid digunakan untuk menghilangkan solder dari sambungan pada papan sirkuit cetak (PCB) tanpa meninggalkan residu. Cocok untuk perbaikan dan perawatan peralatan elektronik industri.

Di mana beli TECHSPRAY Desoldering Braid di Indonesia?

Anda dapat membeli TECHSPRAY Desoldering Braid 1821-10F melalui 3G Electric, distributor resmi yang memasok dan mengirimkan produk ini ke seluruh Indonesia. Kami menangani logistik dan bea cukai untuk memastikan pengiriman lancar.

Bagaimana cara memilih TECHSPRAY Desoldering Braid yang tepat?

Pilih berdasarkan lebar dan panjang yang sesuai dengan kebutuhan Anda. TECHSPRAY Desoldering Braid tipe #2 dengan lebar 0,055 inci dan panjang 10 kaki cocok untuk pekerjaan desoldering umum pada komponen elektronik.

Digunakan dalam

Aplikasi umum untuk TECHSPRAY
Electronics rework — TECHSPRAY no-clean flux desoldering braid #3 (MPN 1822-5F) for removing solder from through-hole components on PCBs
HVAC control board repair — TECHSPRAY rosin flux desoldering braid #4 (MPN 1811-5F) for desoldering relays and capacitors
Industrial equipment maintenance — TECHSPRAY acid brush (MPN 2030-1) for applying flux to pipe joints during brazing
Field-service electronics — TECHSPRAY desoldering braid #2 (MPN 1821-5F) for fine-pitch surface-mount device removal
Chemical application in manufacturing — TECHSPRAY utility brush (MPN 2033-1) for spreading cleaning solvents on metal surfaces
Prototype assembly — TECHSPRAY rosin flux desoldering braid #3 (MPN 1810-10F) for iterative solder removal during design validation

TECHSPRAY Produk

3G Electric memasok TECHSPRAY no-clean flux desoldering braids. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.

Anda mungkin juga membutuhkan

Pembakar & Pembakaran →Pompa & Kompresor →Suku Cadang →Semua Produk →

Compatible alternatives & equivalents

Cross-referenced by specification & description
TECHSPRAY 1809-10F is a rosin flux desoldering braid in size #2, 0.055 inches wide and 10 feet long. It is yellow and ESD-safe, designed for removing solder from electronic assemblies during rework or repair. Suitable for use on circuit boards and fine-pitch components
TECHSPRAY
TECHSPRAY 1809-10F is a rosin flux desoldering braid in size #2, 0.055 inches wide and 10 feet long. It is yellow and ESD-safe, designed for removing solder from electronic assemblies during rework or repair. Suitable for use on circuit boards and fine-pitch components
This yellow desoldering braid is coated with rosin flux to facilitate solder absorption during rework and repair of electronic assemblies. The #2 size, 0.055-inch width, and 5-foot length make it suitable for precise solder wicking on PCBs, component removal, and cleaning solder joints
TECHSPRAY
This yellow desoldering braid is coated with rosin flux to facilitate solder absorption during rework and repair of electronic assemblies. The #2 size, 0.055-inch width, and 5-foot length make it suitable for precise solder wicking on PCBs, component removal, and cleaning solder joints
This green desoldering braid is pre-fluxed with rosin for efficient solder removal during electronics rework and repair. Size #3, 0.075 inches wide, 10 feet length. ESD-safe construction suitable for sensitive environments
TECHSPRAY
This green desoldering braid is pre-fluxed with rosin for efficient solder removal during electronics rework and repair. Size #3, 0.075 inches wide, 10 feet length. ESD-safe construction suitable for sensitive environments
Rosin flux desoldering braid for removing solder from electronic assemblies. Size #3, 0.075 inches wide, 5 feet long. Green color. ESD-safe construction protects sensitive components during rework
TECHSPRAY
Rosin flux desoldering braid for removing solder from electronic assemblies. Size #3, 0.075 inches wide, 5 feet long. Green color. ESD-safe construction protects sensitive components during rework
Rosin flux desoldering braid for removing solder from electronic assemblies during rework or repair. Yellow color, ESD-safe construction. Width 0.06 in, length 10 ft. Part number 40-2-10
CHEMTRONICS
Rosin flux desoldering braid for removing solder from electronic assemblies during rework or repair. Yellow color, ESD-safe construction. Width 0.06 in, length 10 ft. Part number 40-2-10
Rosin flux desoldering braid for removing excess solder from electronic circuit boards. Width 0.11 inches, length 10 feet, blue color, ESD-safe. Suitable for through-hole and surface-mount desoldering tasks
CHEMTRONICS
Rosin flux desoldering braid for removing excess solder from electronic circuit boards. Width 0.11 inches, length 10 feet, blue color, ESD-safe. Suitable for through-hole and surface-mount desoldering tasks

Lainnya dari TECHSPRAY

Lihat semua TECHSPRAY suku cadang →
TECHSPRAY desoldering braid with no-clean flux for removing excess solder from electronic assemblies. Size #4, 0.098 in width, 5 ft length. Blue color, ESD-safe construction. Used in PCB rework and repair
TECHSPRAY
TECHSPRAY desoldering braid with no-clean flux for removing excess solder from electronic assemblies. Size #4, 0.098 in width, 5 ft length. Blue color, ESD-safe construction. Used in PCB rework and repair
This desoldering braid is size #4 with a width of 0.098 inches and a length of 10 feet. It features a no-clean flux that eliminates post-soldering cleaning. The braid is blue and ESD-Safe, suitable for removing solder from electronic assemblies during rework or repair
TECHSPRAY
This desoldering braid is size #4 with a width of 0.098 inches and a length of 10 feet. It features a no-clean flux that eliminates post-soldering cleaning. The braid is blue and ESD-Safe, suitable for removing solder from electronic assemblies during rework or repair
TECHSPRAY no-clean flux desoldering braid, size #2, 0.055 inches wide and 100 feet long, in yellow. Used to wick excess solder from circuit boards during rework or repair, with a no-clean flux formulation that eliminates post-solder cleaning
TECHSPRAY
TECHSPRAY no-clean flux desoldering braid, size #2, 0.055 inches wide and 100 feet long, in yellow. Used to wick excess solder from circuit boards during rework or repair, with a no-clean flux formulation that eliminates post-solder cleaning
TECHSPRAY No-Clean Flux Desoldering Braid, type #2, 0.055 in wide, 5 ft length, yellow color, ESD-safe. Designed for removing solder from electronic assemblies, the no-clean flux leaves minimal residue, eliminating post-solder cleaning. Suitable for PCB repair and prototyping in industrial electronics
TECHSPRAY
TECHSPRAY No-Clean Flux Desoldering Braid, type #2, 0.055 in wide, 5 ft length, yellow color, ESD-safe. Designed for removing solder from electronic assemblies, the no-clean flux leaves minimal residue, eliminating post-solder cleaning. Suitable for PCB repair and prototyping in industrial electronics
This desoldering braid is used to remove excess solder from printed circuit boards during rework or repair. It features a no-clean flux that eliminates the need for post-soldering cleaning. The braid is ESD-safe and comes in green
TECHSPRAY
This desoldering braid is used to remove excess solder from printed circuit boards during rework or repair. It features a no-clean flux that eliminates the need for post-soldering cleaning. The braid is ESD-safe and comes in green
Desoldering braid with no-clean flux for removing solder from electronic assemblies. Size #3, 0.075 in width, 10 ft length, green color, ESD-safe. Suitable for rework and repair of printed circuit boards
TECHSPRAY
Desoldering braid with no-clean flux for removing solder from electronic assemblies. Size #3, 0.075 in width, 10 ft length, green color, ESD-safe. Suitable for rework and repair of printed circuit boards