TELEMECANIQUE SENSORS Cordset: M12 Female Right Angle X Bare Wire, 4 Pins, Black, PUR, 5 m Cable Lg
The TELEMECANIQUE SENSORS Cordset (SKU 19MJ18, MPN XZCP1241L5) is a single-ended cordset with a PUR jacket designed for twisting applications. It features an M12 female right-angle connector on one end and bare wire…
SKU 3G-OTH-51374
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The TELEMECANIQUE SENSORS Cordset (SKU 19MJ18, MPN XZCP1241L5) is a single-ended cordset with a PUR jacket designed for twisting applications. It features an M12 female right-angle connector on one end and bare wire on the other, with 4 pins, 18 AWG wire size, and an IP67 rating.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is the TELEMECANIQUE SENSORS XZCP1241L5 cordset used for?
This single-ended cordset connects sensors or actuators in industrial automation, especially in twisting or flexing cable applications. Its M12 female right-angle connector and bare-wire end suit tight spaces, while the PUR jacket resists oils and abrasion in factory-floor environments.
What are the specifications of the TELEMECANIQUE SENSORS XZCP1241L5?
The cordset has an M12 female right-angle connector to bare wire, 4 pins, 18 AWG wire, 5 m cable length, PUR black jacket, IP67 rating, and 3 A max current. It is designed for twisting applications and carries the MPN XZCP1241L5 from TELEMECANIQUE SENSORS.
Where to buy the TELEMECANIQUE SENSORS XZCP1241L5 worldwide?
3G Electric supplies the TELEMECANIQUE SENSORS XZCP1241L5 cordset worldwide. As a global industrial distributor, we handle full logistics, customs clearance, and delivery to your site. Contact us for availability and lead time.
How to install the TELEMECANIQUE SENSORS XZCP1241L5 cordset?
Connect the M12 female right-angle end to the sensor or actuator, then terminate the bare wires to your control system per the pinout. Ensure the IP67 seal is tight and avoid exceeding 3 A. For twisting applications, secure the cable to prevent strain on the connector.
Digunakan dalam
Aplikasi umum untuk TELEMECANIQUE SENSORSTELEMECANIQUE SENSORS Produk
3G Electric memasok TELEMECANIQUE SENSORS single-ended cordsets with pur jacket for twisting applications. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.













