TELEMECANIQUE SENSORS Air Compressor Switch: Std, 100 psi – 200 psi
The TELEMECANIQUE SENSORS Air Compressor Switch: Std (MPN 9013FHG54J59X) is a general-purpose air compressor switch with a diaphragm actuator. It features a standard operating mode and (4) 1/4" FNPS connections, with…
SKU 3G-OTH-169085
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The TELEMECANIQUE SENSORS Air Compressor Switch: Std (MPN 9013FHG54J59X) is a general-purpose air compressor switch with a diaphragm actuator. It features a standard operating mode and (4) 1/4" FNPS connections, with a pressure range of 100 psi to 200 psi.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is the TELEMECANIQUE SENSORS 9013FHG54J59X air compressor switch used for?
This general-purpose air compressor switch controls the start/stop cycle of an electric motor based on tank pressure. It is commonly used in industrial air compressors, pressure washers, and pneumatic systems to maintain pressure between 100 psi and 200 psi.
What are the specifications of the TELEMECANIQUE SENSORS 9013FHG54J59X air compressor switch?
The switch has a diaphragm actuator, a standard operating mode, and four 1/4" FNPS connections. Its pressure range is 100 psi to 200 psi. The manufacturer part number is 9013FHG54J59X, and it is made by TELEMECANIQUE SENSORS.
Where to buy the TELEMECANIQUE SENSORS 9013FHG54J59X air compressor switch worldwide?
3G Electric supplies this TELEMECANIQUE SENSORS air compressor switch worldwide. We handle full logistics, customs clearance, and delivery to your site. Contact us for availability and lead time. We source and deliver genuine industrial components globally.
How to install a TELEMECANIQUE SENSORS diaphragm air compressor switch?
Mount the switch securely, connect the four 1/4" FNPS ports to the compressor tank and unloader valve, and wire the motor leads per the diagram. Adjust the set-point screws for the desired cut-in and cut-out pressures within the 100–200 psi range. Always disconnect power before installation.
Digunakan dalam
Aplikasi umum untuk TELEMECANIQUE SENSORSTELEMECANIQUE SENSORS Produk
3G Electric memasok TELEMECANIQUE SENSORS general purpose air compressor switches. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.















