TEMPCO Swaged Cartridge Heater: 300 W Watts, 3 in Lg, 10 in Lead Lg, 120V, 153 W/sq in
The TEMPCO Swaged Cartridge Heater (SKU 4NJC7, MPN HDC00059) is a 300 W cartridge heater with a 1/4 in diameter and 3 in length. It operates at 120V with a watt density of 153 W/sq in and features 10 in lead length.
SKU 3G-OTH-66864
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The TEMPCO Swaged Cartridge Heater (SKU 4NJC7, MPN HDC00059) is a 300 W cartridge heater with a 1/4 in diameter and 3 in length. It operates at 120V with a watt density of 153 W/sq in and features 10 in lead length.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is the TEMPCO Swaged Cartridge Heater used for?
The TEMPCO Swaged Cartridge Heater is used for direct immersion heating in industrial applications such as plastic injection molding, packaging machinery, and hot-runner systems. Its compact 1/4 in diameter and 3 in length allow insertion into drilled holes for precise, localized heat transfer.
What are the specifications of the TEMPCO Swaged Cartridge Heater?
The TEMPCO Swaged Cartridge Heater (MPN HDC00059) delivers 300 W at 120V with a watt density of 153 W/sq in. It has a 1/4 in diameter, 3 in length, and 10 in lead length. The swaged construction ensures tight fit and efficient heat transfer in confined spaces.
Where to buy the TEMPCO Swaged Cartridge Heater worldwide?
You can source the TEMPCO Swaged Cartridge Heater through 3G Electric, a global industrial equipment distributor. We handle full logistics, customs clearance, and delivery to worldwide destinations. Contact us for availability and lead time on this cartridge heater.
How to install a TEMPCO Swaged Cartridge Heater?
To install, drill a clean hole slightly smaller than the 1/4 in diameter for a press fit. Insert the heater fully, ensuring leads are not stressed. Use a high-temperature sealant if needed. Always disconnect power before installation and follow TEMPCO guidelines for proper lead support.
Digunakan dalam
Aplikasi umum untuk TEMPCOTEMPCO Produk
3G Electric memasok TEMPCO cartridge heaters. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.











