TEMPCO Swaged Cartridge Heater: 500 W Watts, 3 in Lg, 10 in Lead Lg, 240V, 170 W/sq in
The TEMPCO Swaged Cartridge Heater (MPN HDC00252) is a 500 W cartridge heater with a 240V rating and a watt density of 170 W/sq in. It features a 3/8 in diameter, 3 in length, and 10 in lead length. This industrial…
SKU 3G-OTH-69009
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The TEMPCO Swaged Cartridge Heater (MPN HDC00252) is a 500 W cartridge heater with a 240V rating and a watt density of 170 W/sq in. It features a 3/8 in diameter, 3 in length, and 10 in lead length. This industrial heating element is designed for direct insertion into drilled holes for efficient heat transfer.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is the TEMPCO Swaged Cartridge Heater used for?
The TEMPCO Swaged Cartridge Heater is used for direct insertion into drilled holes in industrial equipment to provide efficient, localized heat transfer. Common applications include plastic injection molding, packaging machinery, and hot-runner systems where precise, high-watt-density heating is required.
What are the specifications of the TEMPCO Swaged Cartridge Heater HDC00252?
The TEMPCO Swaged Cartridge Heater (MPN HDC00252) delivers 500 W at 240V with a watt density of 170 W/sq in. It has a 3/8 in diameter, 3 in length, and 10 in lead length. This swaged design ensures tight fit and efficient heat transfer in drilled holes.
Where to buy the TEMPCO Swaged Cartridge Heater worldwide?
3G Electric supplies the TEMPCO Swaged Cartridge Heater worldwide. As a global industrial distributor, we handle full logistics, customs clearance, and delivery to your site. Contact us for availability and lead time; we source and deliver this heater to any international destination.
How to install a TEMPCO Swaged Cartridge Heater?
To install, ensure the drilled hole is clean and slightly smaller than the heater diameter for a press fit. Insert the TEMPCO heater fully, avoiding sharp bends on leads. Use a temperature controller matched to the 240V rating. Always disconnect power before installation and follow standard industrial safety practices.
Digunakan dalam
Aplikasi umum untuk TEMPCOTEMPCO Produk
3G Electric memasok TEMPCO cartridge heaters. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
