THOMAS & BETTS Conduit & Pipe Strap Clamp, One-Hole: 3/8 in Trade Size, Steel
The THOMAS & BETTS Conduit & Pipe Strap Clamp, One-Hole (SKU 3KF71, MPN HS 100 SC) is a steel surface-mount clamp for IMC and RMC conduit. It is zinc-plated with a gray finish, designed for a 3/8 in trade size and…
SKU 3G-OTH-04763
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The THOMAS & BETTS Conduit & Pipe Strap Clamp, One-Hole (SKU 3KF71, MPN HS 100 SC) is a steel surface-mount clamp for IMC and RMC conduit. It is zinc-plated with a gray finish, designed for a 3/8 in trade size and compatible pipe size. The clamp has an overall width of 3/4 in and overall length of 1-3/4 in.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is the THOMAS & BETTS HS 100 SC conduit strap clamp used for?
The THOMAS & BETTS HS 100 SC is a one-hole steel strap clamp used to surface-mount IMC and RMC conduit of 3/8 in trade size. It secures conduit runs to walls, ceilings, or strut channels in commercial and industrial electrical installations. The zinc-plated gray finish resists corrosion in dry indoor environments.
What are the specifications of the THOMAS & BETTS HS 100 SC clamp?
The HS 100 SC is a steel surface-mount clamp for 3/8 in IMC and RMC conduit. It has a zinc-plated gray finish, overall width of 3/4 in, and overall length of 1-3/4 in. The clamp is compatible with 3/8 in pipe size and is manufactured by THOMAS & BETTS. It is designed for cable use and classified under UNSPSC 39121701.
Where to buy THOMAS & BETTS HS 100 SC conduit clamps worldwide?
3G Electric supplies the THOMAS & BETTS HS 100 SC conduit strap clamp worldwide. As a global industrial distributor since 1990, we handle full logistics, customs clearance, and delivery to your site. Contact us for availability and lead time. We source and deliver this clamp to any country.
How to install a THOMAS & BETTS one-hole conduit strap clamp?
Position the clamp around the 3/8 in IMC or RMC conduit, align the single hole with the mounting surface, and secure with a fastener (not included). Use a screw or bolt appropriate for the substrate. Ensure the conduit is fully seated in the clamp before tightening. Follow local electrical codes for support spacing.
Digunakan dalam
Aplikasi umum untuk THOMAS & BETTSTHOMAS & BETTS Produk
3G Electric memasok THOMAS & BETTS surface mount clamps for conduit & pipe. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
