TIMKEN 2 Bolt Flange Bearing: Radial Ball, 1 7/16 in Bore, Cast Iron, Set Screws
The TIMKEN 2 Bolt Flange Bearing is a general purpose flange-mount ball bearing with a 1 7/16 in cylindrical bore, cast iron housing, and set screw locking. It features a 6 1/8 in length, uses NLGI #2 equivalent…
SKU 3G-OTH-115750
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The TIMKEN 2 Bolt Flange Bearing is a general purpose flange-mount ball bearing with a 1 7/16 in cylindrical bore, cast iron housing, and set screw locking. It features a 6 1/8 in length, uses NLGI #2 equivalent lubricant, and has a 1/2 in mounting bolt size. This inch-system radial ball bearing is manufactured under part number YCJT 1-7/16 SGT.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is the TIMKEN 2 Bolt Flange Bearing used for?
The TIMKEN YCJT 1-7/16 SGT is a general purpose flange-mount ball bearing used to support rotating shafts in industrial machinery, conveyors, and material handling equipment. Its cast iron housing and set screw locking provide reliable radial load support in moderate-duty applications.
What are the specifications of the TIMKEN YCJT 1-7/16 SGT flange bearing?
This TIMKEN bearing has a 1 7/16 in cylindrical bore, cast iron housing with set screw locking, and a 6 1/8 in length. It uses NLGI #2 equivalent lubricant, requires a 1/2 in mounting bolt, and is built with 52100 steel. The system of measurement is inch.
Where to buy TIMKEN YCJT 1-7/16 SGT flange bearings worldwide?
3G Electric supplies and delivers the TIMKEN YCJT 1-7/16 SGT flange bearing worldwide. As a global industrial solutions provider, we handle full logistics and customs clearance to ensure your order arrives at your facility, wherever it is located.
How to install a TIMKEN 2 Bolt Flange Bearing with set screws?
Align the bearing housing with the mounting surface, insert bolts through the flange holes, and tighten to the recommended torque. Secure the shaft by tightening the set screws evenly against the shaft flat. Lubricate per the NLGI #2 equivalent specification before operation.
Digunakan dalam
Aplikasi umum untuk TIMKENTIMKEN Produk
3G Electric memasok TIMKEN general purpose flange-mount ball bearings. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
