TIMKEN Pillow Block Bearing: 2 11/16 in Bore, Cast Iron, Set Screws
The TIMKEN Pillow Block Bearing (SKU 842W27, MPN YASM 2-11/16) is a medium duty pillow block ball bearing with a 2 11/16 in bore. It features a cast iron housing with set screws, a 3 1/2 in shaft height, and a…
SKU 3G-OTH-104872
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The TIMKEN Pillow Block Bearing (SKU 842W27, MPN YASM 2-11/16) is a medium duty pillow block ball bearing with a 2 11/16 in bore. It features a cast iron housing with set screws, a 3 1/2 in shaft height, and a mounting bolt size of 3/4 in. This inch-system bearing has a maximum speed of 2500 RPM with grease lubrication.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is the TIMKEN YASM 2-11/16 pillow block bearing used for?
The TIMKEN YASM 2-11/16 is a medium duty pillow block ball bearing used to support rotating shafts in industrial equipment such as conveyors, fans, and pumps. Its cast iron housing with set screws secures the shaft, while the 2 11/16 in bore accommodates inch-system shafts.
What are the specifications of the TIMKEN YASM 2-11/16 pillow block bearing?
The TIMKEN YASM 2-11/16 has a 2 11/16 in bore, cast iron housing with set screws, 3 1/2 in shaft height, and 3/4 in mounting bolt size. It operates at a maximum speed of 2500 RPM with grease lubrication and uses the inch system of measurement.
Where to buy the TIMKEN YASM 2-11/16 pillow block bearing worldwide?
3G Electric supplies the TIMKEN YASM 2-11/16 pillow block bearing worldwide. As a global industrial equipment distributor since 1990, we handle full logistics, customs clearance, and delivery to your location. Contact us for availability and lead time.
How to install the TIMKEN YASM 2-11/16 pillow block bearing?
To install the TIMKEN YASM 2-11/16, align the bearing with the shaft, tighten the set screws evenly, and secure the housing to the mounting surface using 3/4 in bolts. Apply grease lubrication and verify shaft alignment. Follow TIMKEN's generic installation guidelines for best results.
Digunakan dalam
Aplikasi umum untuk TIMKENTIMKEN Produk
3G Electric memasok TIMKEN medium duty pillow block ball bearings. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
